Top
| Introduction | |
| In Memorium : Professor Maurice Godet (1930-1993) | p. 3 |
| Keynote Address : Effect of Automotive Technology and Environmental Factors on Lubricant Requirements | p. 7 |
| Keynote Paper : Environmental Impact of Lubricants | p. 15 |
| Comparative Analysis of the Lubricating Power Between a Pure Mineral Oil and Biodegradable Oils of the Same Mean ISO Grade | p. 25 |
| Transition Phenomena of Lubricating Oils and Greases in a Low Temperature Range Examined by a Torsional Braid Analysis | p. 31 |
| Friction Regimes in the Lubricants Solid-State Regime | p. 45 |
| Granular Lubrication : A Simple Model and Trends | p. 53 |
| Keynote Paper : The Role of Synovial Fluid in Joint Lubrication | p. 65 |
| The Effect of Stationary Loading on the Friction and Boundary Lubrication of Articular Cartilage in the Mixed Lubrication Regime | p. 71 |
| Measurement of Lubricating Film Thickness with Thin Layers of Permeable Hydrogels and Non-Permeable Polyurethane Under Entraining Action | p. 85 |
| Analysis of Artificial Hip Joints as Spherical Bearings | p. 93 |
| Keynote Paper : Lubrication in Metal Forming | p. 101 |
| Reappraisal of Hydrodynamic Lubrication in Metal Rolling Process | p. 113 |
| Wear and Corrosion in the Forming of Beverage Cans | p. 119 |
| The Influence of Interface Material - Lubricant Combinations on Automotive Gearbox Synchronizer Performance | p. 131 |
| Effects of Oil Feed Temperature on the Performance of an Elliptical Bore Bearing | p. 143 |
| Brittle - Ductile Transitions in High Density Polyethylene Films | p. 153 |
| Visualisation of Starved Grease and Fluid Lubricant Films | p. 161 |
| Keynote Paper : Recent Developments in High-Pressure Rheology of Lubricants | p. 169 |
| Static and Dynamic Compressibility of Lubricants Under High Pressures | p. 189 |
| High Pressure Viscosity and Shear Response of Oil Using the Rotating Optical Micro-Viscometer | p. 199 |
| Optimisation of the Rheological Behaviour of Thickened Liquid Lubricants for Spacecraft Applications | p. 207 |
| Keynote Paper : Elastohydrodynamic Lubrication of Real Surfaces | p. 219 |
| Thermal and Non-Newtonian Analysis of EHD Line Contacts | p. 229 |
| Starved Film Thickness: a Qualitative Explanation | p. 249 |
| Numerical Simulation of Waviness in a Circular EHL Contact, Under Rolling/Sliding | p. 259 |
| A New Method of Compensating the Compressibility in an Air Bearing | p. 275 |
| Optimization of Air Compliant Thrust Bearings | p. 283 |
| Development of Aerodynamic Foil Bearings for Small High-Speed Rotor | p. 291 |
| A Tribological Approach to Determine the Friction and Wear Properties of New Environmentally Benign Diesel Fuels in Conjunction with Wear Mechanisms in Critical Parts of Diesel Injection Equipment | p. 303 |
| Testing High Temperature Lubricity of Waterbased and Synthetic Hydraulic Fluids | p. 327 |
| Local Surface Strains in Asperity Contacts : Their Influence on Lubricated Wear | p. 335 |
| Validation of a Piston Ring-Pack Lubrication Model that Includes Realistic Lubricant Rheology | p. 345 |
| Analysis of Friction in a Modern Automotive Piston Ring Pack | p. 355 |
| Effects of Bore Out-of-Roundness on the Predicted Performance of Piston Rings in Internal Combustion Engines | p. 367 |
| Keynote Paper : Lubricated sliding - A Review of Chemical and Physical Effects. Including : Boundary Lubrication (chemical function of applied lubricants), Scuffing (scoring, seizing, galling), Break-in (dynamic changes on sliding surfaces), Lubricated Wear | p. 383 |
| The Direct Observation of the Anti-Wear Action of ZZDP | p. 399 |
| Frictional Properties of Organomolybdenum Compounds in the Presence of ZDTPs Under Sliding Conditions | p. 409 |
| Investigation of Interactions Between Anti wear and Dispersant Additives and Their Effect on Surface Activity of ZDDP | p. 423 |
| Angular Contact Ball Bearing Dynamics, an Experimental and Theoretical Investigation | p. 435 |
| Air Cooled Bearings for Use with High Speed Electric Motors | p. 445 |
| Starvation and Cavitation Effects in Finite Grooved Journal Bearing | p. 455 |
| Keynote Paper : Friction of Adsorbed Layers of Poly-Isoprene Between Two Cobalt Surfaces | p. 467 |
| Behaviour of Lubricants in the Mixed Elastohydrodynamic Regime | p. 479 |
| Visual Observation of the Process of Scuffing | p. 487 |
| Measurement of Elastohydrodynamic Film Formation in Rolling Contacts at Very High Pressures | p. 497 |
| The Friction and Lubrication of Elastomers | p. 503 |
| A Mass Conserving Modal Analysis for Elastohydrodynamic Lubrication | p. 513 |
| Transient EHD Lubrication of Concentrated Line Contacts - Part 1 : Steady-State and Pure Squeeze Cases | p. 525 |
| A General Approximate Solution for Film Thickness for a Lubricated Elastic Cylindrical Line Contact Involving a Compliant Layer on a Rigid Substrate Under Entraining Motion | p. 547 |
| Pressure Spikes in EHL | p. 555 |
| Impact Elastohydrodynamics | p. 565 |
| Performance Measurements of a Self Contained Ring-Oiled Bearing | p. 585 |
| Influence of the Geometrical Structure of Porous Sleeves on Some Tribological Parameters of Porous Bearings | p. 595 |
| Comparisons Between Algebraic Nonlinear Turbulence Models. Application to Seals Analysis | p. 605 |
| The Influence of Boundary Films on Lubricant Anti-Scuff Performance | p. 617 |
| Sliding Friction and Wear of Ceramic/Ceramic Couples Lubricated with Hexadecane | p. 635 |
| Study of Tribochemical Film Formation Using X-Ray Absorption and Photoelectron Spectroscopies | p. 659 |
| Written Discussion | p. 671 |
| List of Delegates | p. 689 |
| Table of Contents provided by Blackwell. All Rights Reserved. |
