Water and Wastewater Engineering

by Davis, Mackenzie

• ISBN13: 9780071713849
• ISBN10: 0071713840
• Edition: 1st
• Format: Hardcover
• Copyright: 2010-04-12
• Publisher: McGraw-Hill Education

Summary

An In-Depth Guide to Water and Wastewater EngineeringThis authoritative volume offers comprehensive coverage of the design and construction of municipal water and wastewater facilities. The book addresses water treatment in detail, following the flow of water through the unit processes of coagulation, flocculation, softening, sedimentation, filtration, disinfection, and residuals management. Each stage of wastewater treatmentpreliminary, primary, secondary, and tertiaryis examined along with residuals management.Water and Wastewater Engineeringcontains more than 100 example problems, 500 end-of-chapter problems, and 300 illustrations. Safety issues and operation and maintenance procedures are also discussed in this definitive resource.Coverage includes: Intake structures and wells; Chemical handling and storage; Coagulation and flocculation; Lime soda and ion exchange softening; Reverse osmosis and nanofiltration; Sedimentation; Granular and membrane filtration; Disinfection and fluoridation; Removal of specific constituents; Drinking water plant residuals management, process selection, and integration; Storage and distribution systems; Wastewater collection and treatment design considerations; Sanitary sewer design; Headworks and preliminary treatment; Primary treatment; Wastewater microbiology; Secondary treatment by suspended and attached growth biological processes; Secondary settling, disinfection, and post aeration; Tertiary treatment; Wastewater plant residuals management; Clean water plant process selection and integration

Author Biography

Author Information
Mackenzie L. Davis, Ph.D., P.E., DEE is Emeritus Professor of Environmental Engineering, Department of Civil and Environmental Engineering, Michigan State University—where, for twenty years, he taught the senior-level design course, Water and Wastewater Treatment Plant Design. Dr. Davis is the author Introduction to Environmental Engineering, Fourth Edition (McGraw-Hill, 2006).

Table of Contents

Chapter 1. The Design and Construction Processes; Chapter 2. General Water Supply Design Considerations; Chapter 3. Intake Structures; Chapter 4. Wells; Chapter 5. Chemical Handling and Storage; Chapter 6. Coagulation and Flocculation; Chapter 7. Lime-Soda Softening; Chapter 8. Ion Exchange; Chapter 9. Reverse Osmosis and Nanofiltration; Chapter 10. Sedimentation; Chapter 11. Granular Filtration; Chapter 12. Membrane Filtration; Chapter 13. Disinfection and Flouridation; Chapter 14. Removal of Specific Constituents; Chapter 15. Water Plant Residuals Management; Chapter 16. Drinking Water Plant Process Selection and Integration; Chapter 17. Storage and Distribution Systems; Chapter 18. General Wastewater Collection and Treatment DesignChapter 19. Sanitary Sewer Design; Chapter 20. Headworks and Preliminary Treatment; Chapter 21. Primary Treatment; Chapter 22. Wastewater Microbiology; Chapter 23. Secondary Treatment by Suspended Growth Biological Processes; Chapter 24. Secondary Treatment by Attached Growth and Hybrid Biological Processes; Chapter 25. Secondary Settling, Disinfection, and Postaeration; Chapter 26. Tertiary Treatment; Chapter 27. Wastewater Plant Residuals Management; Chapter 28. Clean Water Plant Process Selection and Integration; Appendix A. Properties of Air, Water, and Selected Chemicals; Appendix B. U.S. Standard and Sieve Sizes; Appendix C. Pipe, Fitting, and Valve Data; Appendix D. U.S. Environmental Protection Agency Ct Valves for Disinfectants; Index