Building Code Basics Residential Based on the 2006 International Residential Code

by International Code Council

• ISBN13: 9781435400658
• ISBN10: 1435400658
• Edition: 1st
• Format: Paperback
• Copyright: 2008-10-13
• Publisher: CENGAGE Delmar Learning

Summary

Building Code Basics Series - 2006 International Residential Code is the first in the new Building Code Basics series, a series dedicated to presenting high-quality, practical building code information in an organized, user-friendly format. This straightforward, focused approach introduces code requirements with non-threatening, non-code language, allowing readers to gain confidence in their understanding of the material. Code references are also included, and when paired with these non-technical explanations, they are a valuable addition to the book's resources. This book focuses on the basics of the residential code, with topic coverage that corresponds to the order of construction, beginning with sitework and foundations, and ending with the fire and life-safety and environmental requirements of the finished building. Technically accurate and easy to understand, this is the perfect resource for beginning inspectors.

Table of Contents

Preface

Code Administration and Enforcement

Introduction to building codes

The building codes: scope and limitations

International Building Code

International Mechanical Code

International Fuel Gas Code

International Plumbing Code

International Residential Code (IRC)

Dwellings and townhouses Manufactured homes

Accessory buildings and structures

Existing structures

Legal aspects, permits and inspections

Code adoption

Adoption of the IRC

Amending the IRC

Appendices Local and state laws

Authority

Authority and duties of the building official

Interpretations

Alternative methods and modifications

Permits

Permit application plans and specifications

Fees

Permit issuance Inspections

Required inspections

Other inspections

Certificate of occupancy

Board of appeals

Site Development

Site preparation: building location, excavation, fill, and grading

Location on property

Fire separation distance?

Separation distance from property line

Location of foundations adjacent to slopes

Site preparation

General requirements

Soil properties

Fill Storm drainage

III Structural

Structural Design

Criteria Prescriptive and performance

Basic loads (live and dead)

Live loads

Dead loads

Deflection

Wind, snow, seismic and flood loads Wind?

Exposure category?

Hurricanes?

Tornadoes?

Storm shelter

Snow Earthquake

Floods

Footings, foundations and retaining walls

Materials Concrete Masonry Wood

Footings

Footing size

Footing depth

Foundations Concrete Masonry Wood

ICF Foundation drains

Dampproofing and waterproofing

Retaining walls

Framing Floors Walls

Ceilings Roof

Finishes and Weather Protection

Interior and exterior finishes and weather protection

Interior finishes

Gypsum board Plaster

Bathrooms and other areas

Carpet Wood Tile

Exterior wall covering

Water and moisture management

Masonry and stone veneer

Siding EIFS and stucco

Flashing Doors and windows Roof covering

Asphalt shingles

Wood shingles and shakes

Other roof coverings

Flashing

Health and Safety

Floor layout, egress, and other safety considerations

Room sizes

Ceiling heights

Doors Stairs

Emergency escape

Safety glass

Protection from fall (window sill heights and guards)

Means of egress

Fire safety Smoke alarms

Fire sprinkler systems

Separation between dwelling units

Dwelling separation from garage and other structures

Fire resistance rated assemblies

Opening locations

Light, ventilation, sanitation and heating

Natural and artificial light

Natural and artificial ventilation

Stairway illumination

Heating and cooling

Toilet and bathing facilities

Cooking and cleaning facilities (will include sinks, dish cleaning requirements, hot water requirements and other such issues)

Chimneys and fireplaces

Masonry and pre-manufactured

Chimney lining and airflow

Protection of wood and other combustible elements

Hearth

Building Utilities

Mechanical/fuel gas

Heating

Cooling

Combustion air

Gas appliances

Gas piping and protection

Plumbing Water service

Water distribution

Sanitary sewer

Water supply protection

Venting systems

Electrical Service

Branch circuits

Wiring Grounding

Outlet distribution GFCI and AFCI protection

Devices and fixtures

Energy Conservation

Energy conservation

Building insulation

Mechanical equipment efficiency

Electrical fixtures efficiency

Windows and doors

Protection from other hazards

Termite, wood decay, rust and Radon Wood decay locations (further consideration is needed for overlap with framing chapter and discussion of wood protection standards. Author to decide where to address each.)

Rust and protection of metals (corrosion resistanc

Table of Contents provided by Publisher. All Rights Reserved.