Characterization and Control of Interfaces for High Quality Advanced Materials II

by Ewsuk, Kevin; Nogi, Kiyoshi; Waesche, Rolf; Umakoshi, Yukichi; Hinklin, Tom; Uematsu, Keizo; Tomsia, Tony; Abe, Hiroya; Kamiya, Hidehiro; Naito, Makio

• ISBN13: 9780470184141
• ISBN10: 0470184140
• Edition: 1st
• Format: Hardcover
• Copyright: 2007-07-02
• Publisher: Wiley-American Ceramic Society

Summary

This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer-reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.

Author Biography

Kevin G. Ewsuk is a Principal Member of the Technical Staff in the Ceramic Processing and Inorganic Materials Department at Sandia National Laboratories, where he is responsible for ceramic processing and process modeling R&D, advanced composite processing and characterization, and characterizing and modeling powder compaction and sintering. Dr. Ewsuk received his PhD and MS degrees in Ceramic Science from the Pennsylvania State University and his research interests are in powder processing, process characterization, and sintering science and technology.

Table of Contents

Preface

Joining Technology For New Metallic Glasses And Inorganic Materials

The Structure of the Welded Zone and Phase Transformation Behavior of Ni-Based Bulk-Glass Forming Alloy

Brazing of Advanced Ceramic Composites: Issues and Challenges

Development of a Variable Temperature UHV-Laser Microscope Combined With a Pulsed Laser Deposition for In Situ Studies of Ceramics/Metallic Glass Interfaces

Stress Analysis of Geometrically Complex and Ultra Large Scale Model by Fractal Multi-Grid Method

Influence of Grain-Grain Interfaces on Heat Transfer in Dense and Porous Oxide Ceramics

Fabrication of Colloidal Photonic Crystals from Submicron-Sized Spheres

Spark Plasma Sintering of Al₂0₃ Particulate Dispersed Zr₅₅Cu₃₀Al₁₀Ni₅ Metallic Glassy Matrix Composite

Porous Bulk Metallic Glass Produced by Spark Plasma Sintering of Gas Atomized Zr₅₅Cu₃₀Al₁₀Ni₅ Glassy Powders

Mechanical Properties of Friction-Stir Welded Titanium Joint

Silica-Coating of Barium Titanate Particles

Dissolution of Hydrogen into Tungsten Phosphate Glasses through Palladium Coating

Properties of Metallic Glass Coatings on an Aluminum Alloy Substrate Produced Using a HVOF Spraying Process

Photoelectron Spectroscopic Study of Energy Level Alignment at C12A7:e^-/ Alq₃ Interfaces

Development of Nanoceramics: Application to Diffusion Bonding

Influence of Friction Stir Welding Parameters on Microstructure and 91 Mechanical Properties of AA2024-T3 Aluminum Alloy

Effects of Processing Temperature on Bonding Behavior of Hydroxyapatite Ceramics and Titanium by Hydrothermal Hot-Pressing Method

Orientation Distribution in Friction Stir Processed A6061 Aluminum Alloy

Weldability and Mechanical Property of Ni₅₃Nb₂₀Ti₁₀Zr₈Co₆Cu₃ Metallic Glass Foil by Laser Welding

Glass Transition Phenomena and Heat Capacity of Zr_0.55Al_0.10Ni_0.05Cu_0.30

Development of Fiber Laser Aided Spot Heating System and its Application to Control of Microstructure in Pure Aluminum

Preparation of an MTES Hybrid Bloactive Coating on Metal Surfaces Using the Sol-Gel Method

Synthesis of Si0₂-Coated Magnetite NanoParticles and Immobilization of Proteins on Them

Nano-Particles And Powders

Fabrication of Textured Alumina-Mullite-Silicon Carbide Nano-Composites

Colloidal Consolidation of Mixed Powders of the Alumina/Indium Tin Oxide System

Improvement of Silica Particle Dispersability in Xylene Using Surface Modification

Self-Dispersible Silica NanoParticles Modified with Aminoalkylsilane

Low Temperature Co-Fired Ceramics (LTCC)-Design and Characterization of Interfaces

Controlling Interfacial Chemistry During the Processing of Micron Scale Surgical Instruments

Development of Nanoencapsulated Curcumin in Chitosan for Cosmetic Use via Evaporation of O/W/O Emulsion

Structural and Morphological Study of Nanoceramics Prepared by Spray Pyrolysis

Influence of Water Content of Starting Powder Mixture on the Mechanochemical Synthesis of Strontium Doped Lanthanum Manganite

Carbon Nanotubes as Photocatalytic Carriers

Anisotropic Sintering Shrinkage and Grain Growth for Spherical Alumina Powder Compacts Aligned in High Magnetic Field

Effect of Mo Powder Surface Condition on Fabrication of Mo-Si0₂ Functionally Graded Materials with Slipcasting Method

A Mechanically Synthesized La_0.8Sr_0.2MnO₃ Fine Powder for the Cathode Material of an Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC)

Hydrothemal Synthesis of Nanostructured Bi₂Te₃ Powder

Influence of Nanoporous Structure on Silane Coupling Surface Modification Behavior and Adhesion Properties of Spherical Silica Particles

Effect of Magnetic Field on Orientation of Diamagnetic Ceramic Particles Dispersed in Slurry

Micro-Patterning of Tin Oxide by Micro-Molding in Capillaries

Gelcasting Formulation of Alumina Slurry Offering Some Advantages in Ceramic Shaping

Effect of Surfactants on the Formation of Hollow CaCO₃ Particle by Bubble Template Method

A Facile Method to Synthesize ZnO Tubes by Involving Ammonia Bubbles

Rapid Drying Technique for Slip Cast Body

Interface Characterization And Control

Improvement of Molten-Metal Wettability on Ceramics by Micro-Macro Level Morphology Control

Ceramic Surface Roughness Modification Using a Polymethylsilsesquioxane and Silicon Oxycarbide Film Coating

An AFM Study of the Interaction Between an a-Alumina Particle 295 and a Flat Sapphire Surface in High Ionic Strength Electrolyte Solutions

Energy And Environment

Cohesive Dust Cake Formation on a Ceramic Tube Filter as the Main Cause of a Pressure Drop Increase in a High Temperature Gas Cleaning Process

Simulation of the Filtration Process for a Flat Fabric Filter

Evaluation of the Long Term Stability of LSM/ScSZ Composite Powder Materials for SOFC Cathodes

A Novel Concept and Approach to Fabricate Protective K8/PVdF Composite Films on Metallic Bipolar Plates for PEM Fuel Cells

Study of an Alum-Ceramic Heat Storage Material

Development of Filtration Technology for PM2.5 in Diesel Exhaust

Smart Processing Technology

Nanoscale Particle Processing Through Aerosol Routes

A Treatment of Carbonaceous Waste Containing Metals by Steam Plasma

Effect of Ultrasonication on Dispersion and Aggregate Size of Ti0₂ NanoParticles in Concentrated Aqueous Suspension

Investigation of Bonding Mechanism Between Plasma Sprayed Al₂0₃ Top Coating and Ti-Al Undercoating on Steel Substrate

Mechanochemical Synthesis of Barium Titanate From Nanocrystalline BaCO₃ and Ti0₂

The Effect of Direct Diode Laser Beam Size in Heat Conduction Lap Welding of a Thin Film on a Thick Substrate

Mictostructural Characterization and Mechanical Properties of Plasma Sprayed Hydroxyapatite Coatings

Measurements of Cathode Surface Temperature of Plasma Torch

Topology Analysis of the Cu₃Sn Phase in Electronic Interconnections

Freeform Fabrication of Photonic Crystals with 3-Dimensional Diamond Structure by Micro-Stereolithography

Properties of Inductivety-Coupled RF Plasmas Sustained with Internal Antenna for Deposition of Carbon-Related Films

Materials Design

Characteristics of ITO Films Deposited by dc Magnetron Sputtering Using Various Sintered Indium-Tin-Oxide Targets

Sintering and Enhanced Mechanical Properties of Densified Multiwalled Carbon Nanotube/TiN Composites

Characterization of the Surface Morphology of Organic and Inorganic Hybrid Thin Films-A First Step to Fabricate an Artificial Cell Membrane

Ion Permeability and Membrane Potential of Organic and Inorganic Hybrid Thin Films-Characterization of Artificial Cell Membrane

Corrosion Resistance of TiAIN/CrN, TiAIN, CrN Coatings Prepared By RF Magnetron Sputtering

Plasma Thermal Deposition of Aluminum on Mg-Li Work-Hardened Alloy

Behavior of Superficial Oxide at Diffusion-Bonded Interface of TiN and its Influence on Bond Strength

The Effects of Functional Groups of Surface Modifier on Internal Friction and Young's Modulus of Ceramic Composites

Author Index

Table of Contents provided by Publisher. All Rights Reserved.