Characterization of Minerals, Metals and Materials

by Hwang, Jiann-Yang; Monteiro, Sergio Neves; Bai, Chengguang; Carpenter, John S.; Cai, Mingdong; Firrao, Donato; Kim, Byoung-Gon

• ISBN13: 9781118291221
• ISBN10: 1118291220
• Format: Hardcover
• Copyright: 2012-04-03
• Publisher: Wiley-TMS

Summary

The symposium will provide an update to the current progress in characterization studies in minerals, metals and materials industry. The scope includes current industrial applications, research and developments, and innovative fundamental researches. Characterization of Ferrous Metals Characterization of Non-Ferrous Materials Characterization of Minerals and Ceramics Characterization Technologies Characterization of Environmental and Construction Materials Characterization of Energy, Electronic and Optical Materials Characterization of Carbon and Soft Materials Characterization of Light Metals Characterization of Ferrous Metal

Table of Contents

Preface	p. xiii
Editors	p. xv
Characterization of Minerals, Metals, and Materials
Characterization of Ferrous Metals	p. 1
Characterization of the Microstructure of Compacted Graphite Cast Iron	p. 3
EBSD Analysis of Complex Microstructures of CSP® Processed Low Carbon Micro-Alloyed Steels	p. 11
Empirical Models of Cold Working Effect in Steel Tube Production	p. 19
Microstructural Investigation of Carbon Steel after Hot Rolling to Optimize Complex Hot Forming of Thick Plates	p. 27
Microstructural Characterization of Fe-Mn-C Ternary Alloy under Near-Rapid Solidification	p. 35
Effects of Surface Modifications on SCW Corrosion Resistance	p. 43
Interface Mass Transfer during the Tribofinishing Process	p. 49
Characterization of Non-Ferrous Materials
Improvement of Mechanical Properties in Severely Plastically Deformed Ni-Cr-Alloy	p. 61
Processing and Microstructural Control of Copper Foams for Thermal Wick Material Systems	p. 69
Characterization of Minerals and Ceramics
A Novel Low-Energy Route for the Extraction of Copper And Cobalt Metals/Alloys from the Zambian Sulphide Concentrates	p. 79
Structural and Chemical Modification of Sulfide Mineral Surfaces by High-Power Nanosecond Pulses	p. 89
Characterization of Magnetic and Non-Magnetic Iron Oxide Nanoparticles Synthesized by Different Routes	p. 99
Characterization of Concentrate, Pellet and DRI Samples for Trace Elements	p. 107
The Dielectric and the Temperature-rising Characteristics of Ore Fines Materials in Microwave Field	p. 115
Characterization on the Roughness of the Iron Ore Particles	p. 123
Synthesis and Characterization of Al, Ag, Ti, Cu, and B Substituted Hydroxylapatite	p. 131
Electric Resistivity of Fine Chromite Ore	p. 139
Melting and Reduction of Manganese Sinter with Fluxes	p. 147
Ceramic Pigments with Spinel Structure Obtained by Low Temperature Methods	p. 155
Mechanical Characterization of Cellular Ceramic Materials	p. 163
Study of Attapulgite for Human Health	p. 169
Characterization Technologies
3D Metallography of Multiphase Steels	p. 177
Characterization of Open-Pored Metals Using Image Processing	p. 185
Thermography Assisted Fatigue Testing	p. 193
Characterization of Environmental and Construction Materials
Tile Production Using Wastes from Mining Industry of the Mining District Pachuca and Real Del Monte	p. 203
Concrete with Cementitious Steel Slag Composites and Its Applications	p. 211
Characterization of Dust Generated in the BOF Converter	p. 221
Experimental Research to Improve the Soundness of Cementitious Material Blended with Cycled Fluidized Bed Ash	p. 229
Production of Apatitic Material Using Turkish Colemanite Mineral	p. 239
Setting Time of Concrete Material; Laboratory Measurements Versus Field Applications	p. 251
Gas Emission and Structural Changes in the Firing of Red Clay Ceramics with Addition of Sanitary Ware Mass Wastes	p. 259
Characterization of Energy, Electronic and Optical Materials
Influence of La2O3 Additive Content on the Phase Stability, Sintering and Microstructure of 8 MOL% Y2O3 Stabilized Cubic Zirconia (8YSZ) Ceramic Used for Solid Oxide Fuel Cell Applications	p. 269
Development and Characterization of Carbonaceous Materials Incorporated with Metal (Ti, V and Zn)-Organic Compounds for Hydrogen Storage	p. 277
Characterization of Nickel Oxide Nanoparticles for Hydrogen Adsorption with External Electric Field	p. 285
Nanocrystalline CdS Thin Films Prepared by Vacuum Evaporation	p. 293
Structure-Property Correlation of xPb(Ni0.33Nb0.67)O3-(1-x)Pb(Zr0.31Ti0.69)O3 Based Relaxor-Ferroelectric Ceramics Synthesized Via Columbite Precursor Method	p. 303
The Characteristics of Optical Recording Media Affected by the Accelerating Aging Test	p. 311
A Comparison between the Properties of Spray-Pyrolyzed SnO2:F/CdS:In Structures Prepared by Using NH4F and HF as a Source of Fluorine	p. 319
Characterization and Preparation of Anti-Reflection Coatings in the RANGE of 3-5 ¿m for Si Optical Window	p. 327
Characterization of Carbon and Soft Materials
Thermal Properties of Polyester Composites Incorporated with Coir Fiber	p. 341
Investigating the Rheology of LCPs through Different Die Geometries	p. 349
Effect of the Fiber Equivalent Diameter on the Elastic Modulus and Density of Sisal Fibers	p. 357
Correlation between the Density and the Diameter of Buriti Fibers	p. 365
Thermal and Morphological Behavior of EVOH/Piassava Fiber Composites	p. 373
Thermal Behavior of Banana Fiber	p. 381
Comparative Studies of Crushing Behavior of Various Fiber Reinforced Skin Polyurethane Foam Cored Composite Sandwich Structures	p. 387
Elastic Modulus Variation with Diameter for Ramie Fibers	p. 395
Comparative Study of the Sugarcane Bagasse Fiber/HDPE Composite Properties Using Electron-Beam and Gamma Radiation Treatments	p. 403
Characterization of Light Metals
Influence of Deformation on the Properties of Carbon-Fiber Reinforced 2024 Alloy Matrix Composites	p. 413
Microstructure and Deformation Behavior of Mg-Zn-Al-Re Magnesium Alloy	p. 421
Microstructures and Tensile Mechanical Properties of Mg-9Zn-0.6Zr-2Er Magnesium Alloy	p. 427
Nanobond - The Perfect Refractory Choice for Quick Lining and Repairing of Aluminium Melting Furnaces	p. 435
Characterization of Grit Blasted Metallic Biomaterials by Thermoelectric Power Measurements	p. 443
Characterization of the Torsional Response of As-cast A359-SiCp-30% at Elevated Temperatures	p. 451
Characterization of Ferrous Metals II
Comparison of Creep Life Assessment between Tin-Based Lead-Free Solders and Lead Solders	p. 479
Correlationship between JIC and Equivalent Fracture Strain Determined by Small-Punch Test in JN1, JJ1 and JK2 Austenitic Stainless Steels	p. 487
Effect of Heat Treatment on the Surface Characteristics of AISI D2 Steel Machined by Wire EDM	p. 495
Hot Deformation Study by Processing Maps of N Containing Microalloyed Steel	p. 503
Influence of Annealing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Sheet of Fe-36Ni Invar Alloy	p. 511
Mechanical Properties of Friction Stir Welded Inconel 600/SS 400 Lap Joints	p. 519
Author Index	p. 527
Subject Index	p. 531
Table of Contents provided by Ingram. All Rights Reserved.