Energy Technology 2012 : Carbon Dioxide Management and Other Technologies

by Salazar-Villalpando, Maria D.; Neelameggham, Neale R.; Guillen, Donna Post; Pati, Soobhankar; Krumdick, Gregory K.

• ISBN13: 9781118291382
• ISBN10: 1118291387
• Format: Hardcover
• Copyright: 2012-04-03
• Publisher: Wiley-TMS

Summary

This proceedings covers topics in technology and processes to improve industrial energy efficiency, reduction in CO2 and other greenhouse gases, and alternative energy sources. It addresses the need for sustainable technologies in extractive metallurgy, materials processing, and manufacturing industries with reduced energy consumption and CO2 emission. The book includes discussion on solar and electrochemical CO2 conversion and utilization technologies for fuels synthesis, such as (but not limited) photo-electrochemical, photocatalytic, electrochemical and solar thermo-chemical methods. Industrial energy efficiency technologies and processes discussed include improved extractive processes along with technologies such as waste heat recovery. A strong emphasis is given to papers focusing on reduction of atmospheric CO2 and conversion of CO2 into high value products.

Table of Contents

Preface	p. xiii
Editors	p. xvii
Energy Technologies and Carbon Dioxide Management
CO2 Management and Utilization
Solar Activated Photocatalytic Conversion of CO2 and Water to Fuels by TiO2-Based Nanocomposites	p. 5
Photocatalytic Efficacy of 1-Dimensional Nanocomposite Electrode	p. 9
Reduction of Energy Consumption and GHGs Emission in Investment Casting Process by Application of a New Casting Method	p. 15
Bauxite Residue Neutralization and Carbon Sequestration from Flue Gas	p. 23
50% Reduction of Energy and CO2 Emission in Metallurgical Furnaces by Burners	p. 31
CO2 Removal from Industrial Off-Gas Streams by Fluidized Bed Carbonation	p. 39
A Hydro-Mechanical Model and Analytical Solutions for Geomechanical Modeling of Carbon Dioxide Geological Sequestration	p. 47
Energy Technologies
Energy Opportunities in the Aluminium Processing Industry	p. 57
An Alternative Lower Temperature Route For The Recovery of Cobalt From Slag	p. 65
High Thermal Energy Storage Density LiNO3-NaNo3-KNO3-KNO2 Quaternary Molten Salts for Parabolic Trough Solar Power Generation	p. 73
Global Primary Aluminium Industry 2010 Life Cycle Inventory	p. 85
Analysis of Combustion Efficiency Using Laser-Induced Fluroscence Measurements of OH-Radicals	p. 93
A Solid State Thermoelectric Power Generator Prototype Designed to Recover Radiant Waste Heat	p. 101
Study on Smelting Reduction of Coal-Containing Pellets of V-Ti Bearing Beach Placers by Combined Rotary Hearth Furnace and Direct Current Arc Furnace	p. 109
A Novel Method Combined Ionothermal Synthesis and Microwave Energies for Rapid Production of ZIFS	p. 117
The Relationship between Energy Consumption and CO2 Emissions in Iron and Steel Making	p. 125
Development and Application of Shaft Kiln in China	p. 133
Preparation of Biodiesel by Transesterification of Canola Oil Using Solid Base Catalyst KOH/?-Al2O3	p. 141
Waste Heat Recovery
Effect of Materials on the Autoignition of Cyclopentane	p. 151
Low Grade Waste Heat Driven Desalination and SO2 Scrubbing	p. 159
Waste Heat Integration Potential Assessment through Exergy Analysis in an Aluminium Production Facility	p. 165
Sustainability, Energy Efficiency and CO2 Elimination in Concentrate Drying	p. 173
Development of Heat Recovery System from Steelmaking Slag	p. 181
Dry Granulation of Molten Blast Furnace Slag and Heat Recovery from Obtained Particles	p. 187
The Environmental Load Assessment of Iron and Steel Producing BF-BOF and EAF Route Process	p. 195
Aluminium Smelter Waste Heat Recovery Plant (Heat Exchangers Fouling and Corrosion-A Detailed Investigation)	p. 203
Battery Recycling
Session I
Economic and Environmental Trade-Offs for Li-Based Battery Recycling	p. 219
Battery Recycling by Hydrometallurgy: Evaluation of Simultaneous Treatment of Several Cell Systems	p. 227
The Use of Liquid-Liquid Extraction and Electroplating to Metals Recovery from Spent Batteries	p. 235
Magnetic Materials for Energy Applications II
Permanent Magnets for Energy Applications
Search for New Rare Earth Based Permanent Magnetic Materials	p. 247
Magnetocaloric and Magnetostrictive Materials
Effect of W Substitution on the Magnetostrictive Behavior of [001] Fe-Ga Alloy Single Crystal	p. 257
Power Conversion and Microstructural Effects
Nanocomposite Alloy Design for High Frequency Power Conversion Applications	p. 267
Magnetic Properties of Strontium Ferrite Prepared Using Submicron-Sized SrFe12-xAlxO19 Powders	p. 275
Influence of Magnetization on the Hydrogen Embrittlement Behavior in AISI 4340 Steel	p. 281
The Effect of Dynamic Electropulsing on Mechanical and Microstructural Properties of Cold Rolled Fe-6.5%Si Alloy Sheet	p. 289
Materials in Clean Power Systems VII: Clean Caol-, Hydrogen Based-Technologies, and Fuel Cells
Fuel Cells
Study of Microstructure and Electrical Conductivity on (Ce0.9Nd0.1)1-xMxO2-¿ Electrolytes for Intermediate-Temperature Solid Oxide Fuel Cells	p. 301
Transition Metal Doping of Manganese Cobalt Spinel Oxides for Coating SOFC Interconnects	p. 305
Materials for Hydrogen Production, Separation, and Storage
Free Form Fabrication of Catalytic Substrates	p. 315
Improved Palladium Coatings for Hydrogen Purification Membranes	p. 323
Raman Spectroscopy of Ammonia Borane at Low Temperature and High Pressure	p. 331
Mechanical Performance of Materials for Current and Advanced Nuclear Reactors
Mechanical Behavior of Reactor Materials
Fracture Toughness of 9Cr-1MoV and Thermally Aged Alloy 617 for Advanced Reactor Applications	p. 343
Characterization and Modeling of Microstructural Evolution in Nuclear Materials
Elemental Solubility Tendency for the Phases of Uranium by Classical Models Used to Predict Alloy Behavior	p. 359
Irradiation and Testing of Fuels and Cladding Materials
Nanoindentation and TEM Characterization of Ion Irridiated 316L Stainless Steels	p. 373
Processing to Control Morphology and Texture in Magnetic Materials
Processing to Enhance Performance in Rare Earth Permanent Magnets
Cluster Synthesis, Direct Ordering and Alignment of Rare-Earth Transition-Metal Nanomagnets	p. 385
Role of Magnetic Fields and Texturing to Improved Magnetic Materials
Nanostructuring and Texturing for Improved Magnetic Materials	p. 393
Author Index	p. 403
Subject Index	p. 407
Table of Contents provided by Ingram. All Rights Reserved.