Mechanical Properties and Performance of Engineering Ceramics and Composites V, Volume 31, Issue 2

by Singh, Dileep; Salem, Jonathan; Mathur, Sanjay; Ohji, Tatsuki

• ISBN13: 9780470594674
• ISBN10: 0470594675
• Edition: 1st
• Format: Hardcover
• Copyright: 2010-10-12
• Publisher: Wiley-American Ceramic Society

Summary

This volume is a compilation of papers presented in the Mechanical Behavior and Performance of Ceramics & Composites symposium during the 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC) held January 24-29, 2010, in Daytona Beach, Florida.The Mechanical Behavior and Performance of Ceramics & Composites symposium was one of the largest symposia in terms of the number (>100) of presentations at the ICACC'10. This symposium covered wide ranging and cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects. Symposium topics included:- Ceramics and composites for engine applications - Design and life prediction methodologies - Environmental effects on mechanical properties - Mechanical behavior of porous ceramics - Ultra high temperature ceramics - Ternary compounds - Mechanics & characterization of nanomaterials and devices - Novel test methods and equipment - Processing - microstructure - mechanical properties correlations - Ceramics & composites joining and testing - NDE of ceramic components

Author Biography

Dileep Singh, Argonne National Laboratory.

Jonathan Salem, NASA Glenn Research Center.

Table of Contents

Preface	p. ix
Introduction	p. xi
Processing
The Effects of Heating Rate on Magnesia Doped Alumina Prepared by SPS	p. 3
Effect of Coke Calcination Temperature on the Processing of Reaction Bonded Silicon Carbide	p. 9
Pressureless Sintering of Mullite-Ceria-Doped Zirconia-Silicon Carbide Composites	p. 15
The Role of Carbon in Processing Hot Pressed Aluminium Nitride Doped Silicon Carbide	p. 27
Characterization
Microstructure and High-Temperature Properties of Si-B-C-N MA-Powders and Ceramic	p. 37
Influence of Water Quality on Corrosion of Multi-Oxide Engineering Ceramics	p. 51
The Effect of Load and Temperature on Hardness of ZrB2 Composites	p. 59
Nano-Indentation Hardness Measurements as a Characterization Technique of SiC and Pyrolytic Carbon Layers of Experimental PBMR Coated Particles	p. 69
High Temperature Mechanical Loss of Nanostructured Yttria Stabilized Zirconia (3Y-TZP) Reinforced with Carbon Nanotubes	p. 79
The Influence of Nanosize Carbon Concentration on Mechanical Properties of RBSIC	p. 87
Si/SiC and Diamond Composites: Microstructure-Mechanical Properties Correlation	p. 97
Mechanical Properties and Failure Criterion of Silicon-Based Joints	p. 107
Effect of Various SnAgTi-Alloys and Laser Induced Texturing on the Shear Strength of Laser Brazed SiC-Steel-Joints	p. 119
Characterization of Poled Single-Layer PZT for Piezo Stack in Fuel Injection System	p. 127
Thermal Tomographic Imaging for Nondestructive Evaluation of Ceramic Composite Materials	p. 137
A More Comprehensive NDE: PCRT for Ceramic Components	p. 145
Fiber Reinforced Composites
Microstructure and Thermodynamic Descriptions of SiC-Based Ceramic Fibers	p. 159
Static Fatigue of Multifilament Tows at High Temperatures above 900°C	p. 173
3D Multiscale Modeling of the Mechanical Behavior of Woven Composite Materials	p. 185
Mode I Interlaminar Fracture Toughness Testing of a Ceramic Matrix Composite	p. 195
Comparative Study of Tensile Properties of Uni-Directional Single-Tow SiC-Matrix Composites Reinforced with Various Near-Stoichiometric SiC Fibers	p. 207
Foreign Object Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite	p. 221
Static Contact Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite with Reference to Foreign Object Damage	p. 233
Effects of Environment on Creep Behavior of NEXTEL™720/Alumina-Mullite Ceramic Composite with ±45° Fiber Orientation at 1200°C	p. 245
Fatigue Behavior of an Oxide/Oxide CMC under Combustion Environment	p. 261
Erosion and Wear
Particle Erosion Wear Behavior of New Conceptual SiC/SiC Composites	p. 275
Threshold of Ring Crack Initiation on CVD-SiC under Particle Impact	p. 285
Advanced Ceramic-Steel Pairings under Permanent Slip for Dry Running Clutch Systems	p. 295
Development and Validation of Lubricated Multi-Disk Clutch Systems with Advanced Ceramics	p. 309
Virtual Testing and Simulation of Multiple Cracking in Transverse Tows of Woven CMCs	p. 319
Isothermal Chemical Vapor Infiltration Modeling by Random Walks in CMT 3D Images at Two Scales	p. 329
Adsorption and Surface Diffusion of Oxygen on 3C and 2H-SiC Polytypes: Numerical Studies	p. 341
Effective Surface Recession Laws for the Physico-Chemical Ablation of C/C Composite Materials	p. 351
Model of the Influence of Damage on the Thermal Properties of Ceramic Matrix Composites	p. 361
Author Index	p. 373
Table of Contents provided by Ingram. All Rights Reserved.