Advanced Design and Manufacture to Gain a Competitive Edge

by Yan, Xiu-Tian; Jiang, Chengyu; Eynard, Benoit

• ISBN13: 9781848002401
• ISBN10: 1848002408
• Format: Hardcover
• Copyright: 2008-09-23
• Publisher: Springer Verlag

Summary

The globalization of manufacturing industries leads to a thirst for rapid advancements in technological development and expertise in advanced design and manufacturing. Both industry and academia have an urgent need to equip themselves of the latest knowledge and trends relating to design and manufacture. Advanced Design and Manufacture to Gain a Competitive Edge collects together papers from the 2008 International Conference on Advanced Design and Manufacture (ICADAM). This conference solicits both cutting edge fundamental research and recent industrial application papers, with a goal towards bringing together from all over the world design and manufacture practitioners from academia, government organizations and industry. Recent advancements, emerging trends and new challenges in the fields of design and manufacturing are covered, with a particular focus on the understanding of the impact of distributed team-based design and manufacture on research and industrial practices for global companies.

Table of Contents

Simulation and Virtual Reality Enabled Design and Manufacture Analysis	p. 1
Simulation-Enabled Approach for Defect Prediction and Avoidance in Forming Product Development	p. 3
A Case Study to Support Conceptual Design Decision Making UsingContext Knowledge	p. 13
Dynamic and Visual Assembly Instruction for Configurable Products Using Augmented Reality Techniques	p. 23
Finite Element Analysis of Square Cup Deep Drawing of Pure TitaniumMetal Sheet at Elevated Temperatures	p. 33
Simulation on Profile Control of a Plate Finishing Rolling Mill	p. 43
Magnetic Field and Forces Analysis of Precision Linear Motor with Air-bearings	p. 53
Analysis and Optimization of Modal Characteristics of the Base of the Cartesian Robot	p. 63
Numerical Analysis on the Temperature and Thermal Stress Distribution in Adhesive Joints	p. 71
Kinematical Modeling for Main Machines and Integrating into Beverage Packaging Production Line	p. 81
Gasketed Joint's Relaxation Behaviour During Assembly Using Different Gaskets: A Comparative Study	p. 91
Finite Element Simulation in Flat Rolling of Multi-Wire	p. 101
Heat Transfer Characteristics inside an Evaporator of a Two-Phase Closed Loop Thermosyphon with Saw Tooth Ribbed Evaporator Surface	p. 111
3rd Order Double B-Splint Surfaces and the 3rd Order Contact in NC Machining	p. 121
The Research of Product and Project-based Aerospace Product Lifecycle Management	p. 131
Application of Soft Computing Techniques to a LQG Controller Design	p. 137
GA-based Automatic Test Data Generation for UML State Diagrams with Parallel Paths	p. 147
Materials Design and Processing	p. 157
Rational Synthesis of Calcium Phosphates with Variable Ca/P Ratios Based on Thermodynamic Calculations	p. 159
Study on Residual Stresses in Milling Aluminium Alloy 7050-T7451	p. 169
High-speed Friction and Wear Behaviour of Ultra-fine Grain Cemented Carbide Cutting Tool	p. 179
Study on Adiabatic Shear Behaviour in Orthogonal Cutting of H13 Steel	p. 189
Study on Effect of Material Strain Rate in Contact Layer on Surface Integrity in Quick-point Grinding	p. 199
Chemical Vapour Deposition Phase Diagrams for Zirconium Carbide	p. 209
Research on Toughening Mechanics of Zirconia Toughened Alumina Composite Ceramics	p. 215
Investigation on the Built-up Edge of Aluminium Matrix Composites	p. 223
Modelling of Temperature History During Machining of Cast Aluminium Alloy	p. 231
Effect of Sandwich Structure on Mechanical Properties of Gray Cast Iron Plates	p. 241
Manufacturing System Design and Analysis	p. 249
General Stiffness Analysis for Multi-Axis Machine Tool	p. 251
A RFID-based Intelligent Control Framework for Plant Production	p. 263
Application of Lubrication Theory to Optimise Grinding Fluid Supply-Surface Integrity Evaluation	p. 273
The Development and Application of Reconfigurable Production Line for Automobile Electromotor	p. 283
Analysis on Volumetric Positioning Error Development due to Thermal Effect Based on the Diagonal Measurement	p. 293
Testing Research on the Thermal Error Characteristic of Ballscrew Feed System	p. 303
Simulation Based Process Parameters Study of the Tube Roll-cutting	p. 315
Online Control Model of Rolling Force Considering Shear Strain Effects	p. 325
Digital Simulation and Performance Analysis on the Roller of a Roller Mill	p. 335
A Type of Elimination-Random Direction Algorithm of Optimum Design	p. 345
Study on Simulative Design in Mixer Rotor Based on Rheological Theory	p. 355
Stochastic Subspace Model Identification and One-step Prediction on Time Series Data	p. 367
Hybrid Discrete Optimization Using Lingo Software for the Design of Mechanical Transmission Systems	p. 377
Toward the Manufacturing Software Interoperability	p. 387
Overview of Modelling, Scheduling, Planning, and Control Using Petri Net Representation and AI Search	p. 397
An Overview of Simulation in Supply Chains	p. 407
The Development of a Stamping Blank Optimal Layout System Based on Interval Method	p. 417
Design of the Wireless Temperature Measurement Alarming System in the High-Voltage Transformer Substation	p. 429
Machine Tools and Manufacturing Technologies	p. 439
The Tool Life Analysis of Ceramic Turning Tools Under the Cumulative Action of Different Cutting Speeds	p. 441
Optimisation of Machining Parameters for NC Milling Ultrahigh Strength Steel	p. 451
A New Method for Piston Ring Contour Cutting Based on Linear Driving	p. 463
Product Lifecycle-oriented BOM Similarity Metric Method	p. 473
Studies on FE Modelling and Stress Characteristics of Joining in the Steel-aluminium Hybrid Structure of Car Body	p. 483
Integrated Highly Effective Deep Hole Processing Technology	p. 493
Game Theory Strategy for Information Standardization Work in Manufacturing Enterprise	p. 503
Stability and its Influence Factors for High-speed Milling	p. 513
Concurrent Intelligent Manufacturing Based on RFID	p. 521
Realization of CNC System on Middle-Convex and Varying Oval Piston Machining	p. 531
Research and Development of Lingsteel Temper Rolling Mill and Key Technique Study	p. 541
Locating Correctness Analysis and Modification for Fixture Design	p. 551
Research of Surface Quality and Wear Tribological Properties of Ceramic Wire Drawing Die Based TiC Machined by Superfine B4C Grinding Agent	p. 563
Research on 2-D Adaptive Rough Surface for Asperity Contact Problem	p. 571
Application of Modified Geometry of Face-Gear Drive with Double Crowned Helical Pinion	p. 579
Study on the Uncertainties of Form Errors Evaluation Under the New GPS Framework	p. 589
Development of a Web-Based Expert System for Metal Cutting Burr Prediction	p. 601
Manufacturing Planning	p. 611
Process Routing Planning System Based on PDM	p. 613
Service-driven Manufacturing Information Processing for Digital Manufacturing Workshop	p. 623
Multi-agent Quality Tracking and Control for Inter-enterprise Based on a Fractal	p. 633
Exploring Parameterised Process Planning for Mass Customisation	p. 643
A Task Compatibility Index for Multi-fingered Robot Hand Grasp Planning	p. 653
Process Control of Enterprise Innovation and Adaptability Control Based on Rapid Prototyping	p. 663
Process Parameters Effect on a Rectangular Tube Hydro-Forming with Magnesium Alloy	p. 671
Quality Prediction of Centrifugal Barrel Finishing Using Genetic Neural Network	p. 687
Model Driven Engineering of Economy of Scope Systems	p. 697
Customer Requirement Translation and Product Configuration Based on Modular Product Family	p. 707
Embedded Data Acquisition Platform Research Oriented to Inter-enterprise Quality Control	p. 719
MEMS	p. 729
Geometrical Integrity of Microholes Drilled by Conventional and Micro Electrical Discharge Machining	p. 731
The Reliability Analysis of the Precision Micro-Punch Life with IC Packing Bag	p. 741
Development of Micro-Assembly Machine Using Linear Motors	p. 749
Efficient Laser Drilling with Double-Pulse Laser Processing	p. 759
Prototyping of the Computer Integrated Manufacturing Processes of MEMS in a Desktop Micro-factory	p. 767
Experimental Research on Electrochemical Micro-machining	p. 775
FEM Calculation of Microscale Laser Shock Processing on MEMS Material with Excimer Laser	p. 785
Study on Temperature Control in the Laser 3D Deposition Process and the Temperature Influences to the Shaping Quality	p. 793
Special Manufacturing Techniques and Industrial Applications	p. 801
Research on the Electrode Resistance in EDM Based on Orthogonal Experiment	p. 803
A Pratical In-Situ CO2 Laser Drilling System for Plasters	p. 815
Continuous Finish Processes Using Combination of Grinding and Electrochemical Finishing on Screw Surfaces	p. 823
Pre-drawing and Air-bulging Technology Used in the In-Mould-Decoration Thermoforming Process for Complex Plastic Products	p. 835
A Research on a System Development Process Model for Industrial Solutions	p. 845
Performance of a Flange Joint Using Different Gaskets Under Combined Internal Pressure and Thermal Loading	p. 855
Experimental Research and FEM Analysis of the Two-Axle Rotary Shaping with Elastic Medium	p. 865
Application of Artificial Muscles as Actuators in Engineering Design	p. 875
Author Index	p. 885
Table of Contents provided by Publisher. All Rights Reserved.