Advances in Fracture Research - 97 : Proceedings of the Ninth International Conference on Fracture, 1-5 April 1997, Sydney, Australia

by Karihaloo, B. L.; International Conference on Fracture 1997 (Sydney, N. S. W.)

• ISBN13: 9780080428208
• ISBN10: 0080428207
• Format: Hardcover
• Copyright: 1997-05-01
• Publisher: Elsevier Science Ltd

Summary

Fracture is a major cause of failure in metallic and non-metallic materials and structures. An understanding of the micro- and macro- mechanisms of fracture enables materials scientists to develop materials with high fracture resistance, which in turn helps engineers and designers to ensure the soundness and integrity of structures made from these materials. The International Congress on Fracture is held every four years and is an occasion to take stock of the major achievements in the broad field of fracture, to honour those who have made lasting contributions to this field, and to reflect on the future directions. ICF9 is published in six volumes covering the areas of:- - Failure Analysis, Remaining Life Assessment, Life Extension and Repair - Failure of Multiphase and Non-Metallic Materials - Fatigue of Metallic and Non-Metallic Materials and Structures - Theoretical and Computational Fracture Mechanics and New Directions - Testing and Characterization Methods, and Interfacial Fracture Mechanics - High Strain Rate Fracture and Impact Mechanics.

Table of Contents

Preface	vii
Volume 1	1	(618)
Linking Scales in Fracture Mechanics	1	(14)
John W. Hutchinson
Recent Techniques for Residual Life Assessment of Materials Serving Fossil Fuel Firing Aged Power Plants	15	(12)
Isamu Nonaka
Masaki Kitagawa
Failure Assessment Diagrams and Mixed Mode Loading and Cracked Tubular Joints	27	(12)
F. M. Burdekin
G. J. Yang
Prediction of High Temperature Creep Fracture Life by Harmonizing Mechanical, Microstructural and Physical Methodologies	39	(12)
A. Toshimitsu Yokobori Jr.
Creep-Fatigue Crack Growth in Power-Plant Materials and Components	51	(12)
Ashok Saxena
Fatigue Crack Propagation and Remaining Life Assessment of Ship Structures	63	(14)
Y. Sumi
Life Assessment of High Temperature Components - Techniques and Models	77	(14)
A. N. Kumar
Structural Integrity for Downstream Operations in the Oil Industry	91	(2)
M. J. Humphries
N. V. Bangaru
M. J. Luton
D. M. R. Taplin
Thoughts on Assessing and Maintaining Structural Integrity	93	(12)
R. Jones
Fracture Mechanics of Materials and Methods of Assessment of Structures Service Life-Time: Success and Prospects	105	(12)
V. V. Panasyuk
O. Ye. Andreykiv
Growth Characterisation of Fatigue Cracks Repaired with Adhesively Bonded Boron/Epoxy Patches	117	(12)
Dr Alan Baker
Design Analysis and Validation for a Bonded Composite Repair to Primary Aircraft Structure	129	(14)
L. R. F. Rose
Characterisation of Creep Fracture at Interfaces in Weldments	143	(12)
R. A. Ainsworth
Design for Cyclic Loading in Transport	155	(12)
R. A. Smith
Life Prediction of Solders in Electronics	167	(12)
W. J. Plumbridge
Experimental Study of Damage Kinetics in XXX/XXX Titanium Alloys	179	(10)
A. L. Helbert
X. Feaugas
M. Clavel
Experimental and Numerical Investigations on Ductile-to-Brittle Transition in a Carbon Steel	189	(8)
Cheng Yan
Yiu-Wing Mai
Shang-Xian Wu
Prediction of Fracture in the Transition Regime: Application to an A533B Pressure Vessel Steel	197	(10)
C. Eripret
D. P. G. Lidbury
A. Sherry
I. Howard
Brittle and Ductile Fracture Transition in Steels Subjected to Mixed Mode Loading	207	(8)
T. D. Swankie
J. C. W. Davenport
D. J. Smith
Fatigue Life Assessment of Steel Pressure Vessels with Varying Stress Concentration, Residual Stress and Initial Cracks	215	(12)
J. H. Underwood
A. P. Parker
Crack Resistance Behaviour of a CrMoV Pressure Vessel Steel	227	(8)
E. Schick
H. Blumenauer
P. Veit
Analytical PWR Vessel Integrity Assessment by Tearing Instability Theory	235	(8)
J. R. Tarpani
D. Spinelli
Mechanical Behaviour and Failure Criterion of TI-6AL-4V Alloy at Room and Cryogenic Temperatures	243	(8)
G. Laurent
G. Cailletaud
L. Remy
Fracture Behaviour of a Single Crystal Nickel Base Superalloy SC16	251	(8)
M. Rumi
W. Chen
H. Fecht
H. Wever
R. P. Wahi
Fracture Toughness of High Strength AA 2090 Thin Sheet	259	(8)
R. Doglione
F. Arena
D. Firrao
The Estimation of Probability Values for Fracture Toughness After Neutron Irradiation	267	(8)
P. L. Windle
Cyclic Plastic Deformation-Induced Martensitic Transformation in Austenitic Steels	275	(8)
J. Kaleta
G. Zietek
Creep - Fatigue Interaction and Life Time Prediction of AISI 316 Stainless Steel at 550(XXX)C	283	(8)
M. Marchionni
D. Ranucci
Creep-Fatigue Damage Analysis on PR-Strained Stainless Steel Type 321 by Tube Working in an Operating Boiler	291	(8)
M. Nakashiro
T. Yoshida
M. Kitagawa
H. Umaki
Creep-Fatigue Cavities and their Transition to Small Cracks Along Grain Boundaries in Type 304 Stainless Steel	299	(8)
N. Tada
T. Kitamura
R. Ohtani
T. Fukuta
Creep-Fatigue Life Evaluation for Weldment of Modified 9Cr-1 Mo Steel	307	(10)
I. Nonaka
S. Torihata
S. Kihara
The Significance of Intergranular Cavitation in Creep-Fatigue	317	(8)
V. Sklenicka
Effect of Hydrogen on Fracture Morphology of Hydrogen Assisted Cracking in Steel Weldments	325	(10)
N. Alam
H. Li
D. Dunne
Triaxiality Effects on Hydrogen-Assisted Micro-Damage Evolution in Eutectoid Steel	335	(8)
J. Toribio
E. Vasseur
Interaction Between Hydrogen Diffusion and Crack Growth in Hydrogen Assisted Cracking	343	(8)
J. Toribio
V. Kharin
Characterisation of Hydrogen Induced Fracture in the Titanium Alloy IMI685	351	(8)
M. R. Bache
H. M. Davies
W. J. Evans
The Role of Oxidation on the Creep Behaviour of a Commercial Purity Nickel	359	(8)
M. C. Pandey
S. Srinivas
Influence of Environment at 500(XXX)C on Fatigue Behaviour in a Ti6246 Alloy	367	(8)
S. Lesterlin
C. Sarrazin-Baudoux
J. Petit
SCC Initiation for 4340 in Distilled Water	375	(8)
A. Atrens
Z. F. Wang
J. Q. Wang
Corrosion Fatigue Remaining-Life Assessment Diagram for Boiler Waterwall Tubes	383	(8)
M. Takanashi
S. Yusa
A. Fuji
S. Kihara
T. Kawashima
H. Yoneyama
I. Kajigaya
Morphological Effect of Grains on High Temperature Creep Fracture in P/M Tungsten Fine Wires	391	(8)
K. Tanoue
Evaluation of Creep Crack Growth Rate in Terms of Creep Fracture Mechanism for 316 Stainless Steel	399	(8)
M. Tabuchi
K. Kubo
K. Yagi
Failure Life Prediction by Simple Tensile Test Under Dynamic Load	407	(8)
S. M. Yang
H. Y. Kang
J. H. Song
S. J. Kwon
H. S. Kim
Life Extension of Fatigue Damaged Components	415	(8)
Z. Domazet
Prediction of Fatigue Interaction from Static Creep and High Frequency Fatigue Crack Growth Data	423	(8)
K. Nikbin
J. Radon
Small-Crack Growth and Life Prediction for LY12cz Aluminum Clad Alloy	431	(8)
X. R. Wu
H. Yu
The Effect of Cold Work on the Liquid Metal Induced Embrittlement of Brass by Gallium	439	(8)
R. E. Clegg
D. R. H. Jones
The Identification of Fatigue-Critical Regions During Fatigue Testing of Macchi MB326H Centre Section Lower Booms	447	(10)
S. Barter
N. Athiniotis
G. Clark
Remaining Life Assessment of a HP-Rotor	457	(10)
R. W. Coade
S. Nowak
Fatigue Propagation Assessment of Turbine Blade Cracks	467	(8)
P. J. Haylen
Comparison of Models for Sustained Load Crack Growth in Aluminium Gas Cylinders	475	(8)
J. W. H. Price
R. N. Ibrahim
D. Ischenko
Boiler Feed Water Pump Shaft Life Assessment Through Residual Stress Measurement	483	(8)
K. Rajanna
C. R. Prasad
G. Jayaraman
Behavior of Cracked Branch Pipes Subject to Out of Plane Bending	491	(8)
S. Chapuliot
D. Moulin
G. Goudet
J. Bourg
Failure Assessment of Cast Steel Bridge Piers by the CEGB R6-Concept of Fracture Mechanics	499	(8)
H. Amstutz
W. Dahl
P. Langenberg
T. Seeger
Cleavage Stress on the Delamination Plane of a Plate Steel	507	(8)
J. Sun
J. D. Boyd
Conceptualization of Crack Closure Mechanism Maps	515	(8)
Vikas Kumar Saxena
V. M. Radhakrishnan
Determination of Residual Stresses and the Resulting Stress Intensity Factors in the Ligament of Pre-Cracked Plates	523	(8)
H. J. Schindler
I. Finnie
Influence of Weld Joint Mechanical Properties on Fracture Toughness	531	(8)
V. Gliha
I. Rak
N. Gubeljak
M. Kocak
Fracture Assessment of Ductile Crack Growth in Weld Material from a Full-Thickness Clad RPV Shell Segment	539	(8)
J. A. Keeney
Residual Stress Effects on Safe-Life of Welded Structures	547	(8)
J. B. Chang
S. T. Chiu
D. L. Goodembeger
Creep Crack Growth and Constraints in Weldments	555	(8)
T. Vilhelmsen
G. A. Webster
A Fracture Driving Force and Failure Assessment Curve Analysis for Weldment with Mechanical Heterogeneity	563	(8)
M. Zhang
Y. W. Shi
J. Q. Fu
J. X. Zhang
Investigation of Weld Failure in Superaustenitic UNS S31245 Stainless Steel	571	(8)
B. Dixon
Cleavage Fracture of a High Strength Steel Weld Metal	579	(8)
R. K. Hughes
J. C. Ritter
Failure Analysis of Adhesively Bonded Joints	587	(8)
C. H. Wang
L. R. F. Rose
Analysis of One-Sided Bonded Repair to a Cracked Thick Plate	595	(8)
C. Zhu
Y. C. Lam
A RLA Based Maintenance Strategy to Extend Life of Equipments and Plants	603	(8)
Dilip K. Mahanty
S. K. Bhave
Tensile Behavior of Intercritically Treated High Martensite Dual-Phase Steel	611	(8)
Asim Bag
M. Menon
K. K. Ray
E. S. Dwarakadasa
Volume 2	619	(590)
Damage Tolerance of Engineered Cementitious Composites	619	(12)
Victor C. Li
Micromechanical Approach to Failure Process in Composites	631	(12)
Asher A. Rubinstein
Effects of Constituent Properties on Residual Strength of Notched Fibre Reinforced Metal Laminates	643	(8)
Akbar Afaghi-Khatibi
Lin Ye
Yu-Wing Mai
Analysis of Debonding in Metal Ceramic Systems	651	(12)
Viggo Tvergaard
Optimization of Fibre-Reinforced Composite Laminate Design	663	(12)
B. L. Karihaloo
J. Wang
Interface and Deformation Micromechanisms in Composite Materials	675	(2)
Sri Bandyopadhyay
Fracture of Fiber-Reinforced Ceramics at Elevated Temperatures	677	(12)
J. Llorca
M. Elices
Fracture Evaluation of a New Wear Resistant Titanium-Graphite Composite for Biomedical Applications	689	(12)
S. H. Teoh
R. Thampuran
W. K. H. Seah
J. C. H. Goh
The Fractal Route to Fracture: Achievements and Open Issues	701	(12)
A. Carpinteri
B. Chiaia
Branching from Interface Cracks Around Circular Second Phase Particles	713	(16)
Graham Baker
Fatigue Fracture Mechanisms of Advanced Polymers	729	(12)
L. Pruitt
Size Effect in Quasibrittle Fracture: Some Recent Advances	741	(10)
Zdenek P. Bazant
Rupture Simulations for Unidirectional Ceramic Matrix Fiber Composites	751	(8)
R. M. McMeeking
M. A. McGlockton
B. N. Cox
Effect of Particle Morphology of Matrix Constraint in Metal Matrix Composites	759	(8)
G. Heness
L. Gan
Y. -W. Mai
Fracture of Brittle Fibre During Axisymmetric Extrusion of Bimetalic Composite	767	(8)
S. Alexandrov
N. Chikanova
An Experimental and Numerical Analysis of the Strength and Ductility of Al-Li/SiC Composites	775	(8)
P. Poza
J. Llorca
An Investigation of the Fracture Behavior of a Metastable Beta Titanium Matrix Composite	783	(10)
O. Jin
W. O. Soboyejo
The Effect of Microstructure of the Fracture Toughness of TI(3)AL Titanium Aluminides	793	(8)
X. Wu
P. Bowen
A Toughening Mechanism of FRP Sheets Used for Post-Strengthening of Structures: Theoretical Analysis	801	(8)
Z. J. Wu
J. Wardenier
A. Romeijn
Loading Rate Dependence of the Fracture Toughness and Fatigue Life of Stitched GRP Composites	809	(10)
M. Z. Shah Khan
A. P. Mouritz
Physical Discretization Facilitates Structural Modelling of Damageable Particulate Polymeric Composites	819	(6)
O. C. Garishin
V. V. Moshev
Discrete Models of Failure for Particulate Polymer Composites	825	(8)
V. V. Moshev
S. E. Evlampieva
Simulation of Scale and Time Phenomena of Damage Initiation in Elastomer Binders of Filled Composites	833	(8)
A. L. Svistkov
S. N. Lebedev
L. A. Komar
Fracture in a Model Brittle Composite Material: Quartz-Perspex	841	(8)
R. Biswas
J. L. Henshall
R. J. Wakeman
Simulations of Random Fractal Fibre Breaking in Composites	849	(8)
P. Stoppel
M. Rybaczuk
Interlaminar Fracture Toughness of Graphite/Epoxy	857	(10)
W. K. Chiu
S. C. Galea
Mode I Interlaminar Fracture Toughness of GFRP Influenced by Fibre Surface Treatment	867	(8)
R. Rikards
F. -G. Buchholz
A. K. Bledzki
A. Korjakin
Moisture Effect on Interlaminar Fracture Toughness of Unidirectional T300/914C Composites	875	(10)
B. Qi
I. Herszberg
M. K. Bannister
Delamination and Creep Rupture of Woven Composite	885	(8)
Feiyi Pang
C. H. Wang
R. G. Bathgate
Compressive Strengths of Carbon Fibre Composites with Short-Fibre Reinforcement	893	(8)
M. S. Sohn
S. Harler
X. Z. Hu
Effect of Hygrothermal Ageing on the Fracture Properties of Rubber Toughened Poly(Butylene Terephthalate) Composites	901	(8)
Z. A. Mohd Ishak
U. S. Ishiaku
J. Karger-Kocsis
Hot-Wet Compression Testing of Impact Damaged Composite Laminates	909	(8)
K. Vijayaraju
P. D. Mangalgiri
B. K. Parida
Failure of Cohesive Granular Materials	917	(10)
S. Van Baars
Determination of Fracture Energy of Cement Paste Cylinders in 3 Point Bending	927	(8)
Birgitte F. Dela
Henrik Stang
Fracture Mechanical Characterization of Asphalt Aggregate Mixtures	935	(8)
E. K. Tschegg
S. E. Stanzl-Tschegg
Crack Growth Resistance Curve in Plain Concrete	943	(6)
D. Sumarac
L. J. Vlajic
G. Sreckovic
M. Simic
D. Lukic
S. Stosic
M. Pavisic
L. J. Brajovic
Numerical Meso Scale Simulations of Multiaxially Loaded Concrete	949	(8)
J. P. W. Bongers
H. J. G. M. Van Geel
Size Effect in Tensile Fracture of Concrete: Effect of Test-Control	957	(8)
Marcel R. A. Van Vliet
Jan G. M. Van Mier
Failure Characteristics of Concrete in Plane Strain Compression	965	(8)
H. J. G. M. Van Geel
J. P. W. Bongers
Fracture Behaviour of Reinforced Ultra High Strength Concrete Beams with Stirrups	973	(8)
J. P. Ulfkjar
M. S. Henriksen
B. Aarup
Fracture Mechanical Calculation of Flexural and Diagonal Tension Strengths of Singly-Reinforced Beams	981	(8)
D. Lange-Kornbak
B. L. Karihaloo
Hydrowedge Assisted Fatigue Cracking of Cement Mortar	989	(8)
R. B. Tait
Fracture Mechanics Approach to Brittle Fracture of Wedge-Shaped Plastics	997	(8)
N. Ohtsuka
Y. Shindo
M. Kanazawa
Branch Crack Growth in Plexiglass	1005	(8)
Chiheb Chaker
Michel Barquins
Geometry-Independent Fracture Mechanics Values as a Requirement for Toughness Optimization of Polymers	1013	(8)
W. Grellmann
S. Seidler
C. Bierogel
Fracture Behaviour and Morphology of Polymers	1021	(8)
S. Seidler
W. Grellmann
Effects of Humidity on Creep Fracture and Crazing Behaviour of PMMA	1029	(8)
C. Ishiyama
Y. Shiraishi
M. Shimojo
Y. Higo
Fracture Behaviour of Glued Wood Laminate Compounds	1037	(8)
S. E. Stanzl-Tschegg
R. J. A. Ehart
E. K. Tschegg
Analysis of Contact Stresses in Ceramic Laminates	1045	(8)
X. Z. Hu
H. Wang
Instability in Compression as a Failure Mechanism for Layered Composites with Parallel Interfacial Cracks	1053	(8)
I. A. Guz
Plane Stress Fracture Toughness of Glass Under Biaxial Tensile Stresses	1061	(6)
Y. Bao
R. W. Steinbrech
Numerical Analysis of the Effect of T-Stress on Crack Growth Resistance in Transformation Toughened Materials	1067	(8)
Geert Stam
An Experimental Approach to Resolve Wake Tractions at Small Crack-Face Separations	1075	(8)
J. Hay
K. White
Crystallographic Orientation Dependency of Cracking Behaviors in Bio-Ceramic Sapphire	1083	(6)
Yuji Kimura
Stoko Takubo
Autocatalytic Transformation, Materials Softening and Toughening of Single and Multi-Phase CE-TZP Ceramics	1089	(8)
Qing-Ping Sun
Xue-Jun Li
Zongjin Li
Transformation and Fatigue Behaviour of A 9 Ce-TZP Ceramic with Processing Flaws	1097	(8)
Tianshun Liu
Ralf Matt
Georg Grathwohl
Optimum Surface Layer of Transformation Toughened Ceramics for Improved Wear Performance	1105	(8)
N. B. Thomsen
Corrosion Characterization and Strength Improvement of Alumina Containing Zirconia in a High Pressure and High Temperature Water Environment Corrosion	1113	(6)
N. Hisamori
Y. Kimura
Whisker Reinforced Copper-Matrix Composites Produced by Hip Treatment	1119	(8)
R. Murakami
T. Hosogi
W. G. Ferguson
Mechanical Properties of Silicate Matrix SiC Yarn Reinforced Composites	1127	(8)
D. M. R. Taplin
G. West
A. R. Boccaccini
M. H. Lewis
Fracture of Silicon Nitride Ceramics: Structural Aspects	1135	(8)
O. M. Romaniv
B. D. Vasyliv
Influence of Sampling Window on the Estimation of Interface Crack Initiation	1143	(8)
M. S. Axelsen
R. Pyrz
Measurement of Meso_Deformation and Singularity Analysis of Interface Crack_Tip for Polylayer Materials	1151	(8)
Liu, Bao Chen
Shi, Xun Qing
The Criterion for Non-Monotonic Deformation in Damage Mechanics	1159	(8)
R. Lapovok
S. Smirnov
Micromechanical Damage Model for Brittle Materials with Residual Strains	1167	(8)
Shou-Wen Yu
Xi-Qiao Feng
Alternative Conditions for the Bifurcation of Critical Equilibrium in Simple Arrays of Cracks	1175	(10)
P. G. Hornby
H. -B. Muhlhaus
A. V. Dyskin
A Damage Zone Modelled by Three Dissimilar Arrays of Interacting Bridged Cracks	1185	(8)
J. Wang
B. L. Karihaloo
Experimental and Theoretical Analysis of Wing Initiation from 3-D Cracks in Uniaxial Compression	1193	(8)
E. Sahouryeh
A. V. Dyskin
Fracture Initiation in Alumina/Aluminium Composites: Effect of Residual Stresses	1201	(8)
Mark Hoffman
Siegfried Skirl
Wolfgang Pompe
Jurgen Rodel
Volume 3	1209	(546)
Dedication to Dr Alan Head	1209	(2)
On the Growth of Fatigue Cracks in Advanced Ceramics and Intermetallics	1211	(2)
R. O. Ritchie
Fatigue Design in Engineering Materials	1213	(12)
J. F. Knott
High Cycle Fatigue Analysis in Mechanical Design	1225	(14)
K. Dang Van
Notch Effect in High Cycle Fatigue	1239	(12)
G. Pluvinage
Plastic Instabilities During Fatigue Cycling	1251	(10)
Andras Abel
Interrelation Between Inelasticity and High-Cycle Fatigue of Metals	1261	(12)
V. T. Troshchenko
Fatigue and Fracture Retardation Using a Thermo-Mechanical Method	1273	(12)
Y. C. Lam
Overload Induced Fatigue Crack Growth and Significance of Retardation Zone	1285	(12)
R. K. Pandey
B. B. Verma
Fatigue Crack Growth in Particle-Reinforced Metal Matrix Composites	1297	(12)
Fernand Ellyin
Influence of Moist Atmospheres on Fatigue Crack Propagation	1309	(12)
J. Petit
G. Henaff
C. Sarrazin-Baudoux
S. Lesterlin
Application of the Weakest Link Model to the Fatigue Limit of a Hard Bainitic Steel	1321	(8)
H. Bomas
T. Linkewitz
P. Mayr
F. Jablonski
R. Kienzler
K. Kutschan
M. Bacher-Hochst
F. Muhleder
M. Seitter
D. Wicke
Fatigue Life Prediction by Statistical Approach Under Constant Amplitude Loading	1329	(8)
O. S. Lee
C. Park
M. K. Han
Probabilistic Mechanics Modeling of Fatigue Crack Growth and Fracture	1337	(8)
A. B. O. Soboyejo
Analytic Solution for Fatigue Life Prediction Under Broad Band Random Loading	1345	(8)
Pengmin Lu
A Hypothesis of Cumulative Damage for Fatigue Crack Initiation and Propagation	1353	(8)
K. M. Golos
The Theory of Longterm Fatigue Fracture Providing for Cracks Initiation and Propagation	1361	(10)
Vladyslav P. Golub
Fatigue Life Under Biaxial Stress State with Different Cross-Correlation Coefficients of Normal Stresses	1371	(8)
T. Lagoda
E. Macha
A Simple Model to Predict Fatigue Strength with Out-of-Phase Tension-Bending and Torsion Stress Condition	1379	(8)
D. Duprat
R. Boudet
A. Davy
Correlation Between Hysteresis Loops and Substructure Alterations During Fatigue Crack Initiation	1387	(8)
H. H. El-Sharawy
F. L. Bastian
The Correlations Among Each Parameter in Some Equations on Crack Growth Stage	1395	(6)
Yu Yangui
Tan Jianrong
The Calculations in a Whole Process of Fatigue-Damage-Fracture for Components	1401	(10)
Yu Yangui
Tan Jianrong
Effects of Sliding Force on Mode I Fatigue Crack Growth	1411	(10)
Xiao-bo Yu
Andras Abel
Cyclic Elastic-Plastic Strain Behavior Ahead of Notches Under Cyclic Tensile Load and Fatigue Life	1421	(8)
K. Shingai
Editing for Accelerated Fatigue Testing Using Strain Range and SWT Parameter Criteria	1429	(8)
R. I. Stephens
J. E. Gunger
Computer-Controlled Device for In-Situ SEM Study of the Fatigue Behaviour of Metals and Ceramics	1437	(6)
O. O. Mouritsen
B. L. Karihaloo
A New Model of Short Crack Closure	1443	(8)
Li Jianchun
David Taylor
The Effect of Small Defects and Residual Stresses on Fatigue	1451	(8)
T. C. Lindley
Environmentally Assisted Small Fatigue Crack Growth in 7017 Aluminium Alloy	1459	(8)
Z. -J. Lu
W. J. Evans
Small Crack Growth Behaviour in Oil Environments	1467	(8)
M. Goto
N. Kawagoishi
H. Miyagawa
H. Nisitani
Crack Closure and Microstructurally Short Fatigue Crack Growth Rates	1475	(8)
Ken Gall
Huseyin Sehitoglu
Fatigue Crack Growth of Al 7475 T761 Under Constant and Variable Amplitude Loading	1483	(8)
Celso Pinto Morais Pereira
Herman Jacobus Cornelis Voorwald
The Effect of Peening on the Fatigue Life of Aluminium Alloys	1491	(10)
P. K. Sharp
G. Clark
Acoustic Emission During Fatigue of Aircraft Aluminium Alloys	1501	(8)
G. Clark
P. K. Sharp
J. Q. Clayton
Fatigue of an Aluminum Alloy Under Predominantly Compressive Loadings	1509	(8)
N. Ranganathan
Behaviour of a Spheroidal Graphite Cast Iron in High Cycle Multiaxial Fatigue Under Random Loading Spectrums in Blocks	1517	(8)
T. Palin-Luc
S. Lasserre
J. -Y. Berard
Fatigue Crack Propagation and Crack Closure in Grey and Austempered Ductile Cast Irons	1525	(8)
Li Wenfong
M. N. James
Effect of Strengthening Mechanisms on Fatigue Properties of Low Carbon Dual Phase Sheet Steel	1533	(8)
M. Kurita
M. Yamamoto
K. Toyama
N. Komatsubara
K. Kunishige
The Effect of Microstructure and Prestrain on Fatigue Crack Propagation of Dual-Phase Steels	1541	(8)
Katsumi Nakajima
Masahiro Yokoe
Takashi Miyata
Fracture and Fatigue Crack Growth Behaviour of High Martensite Dual-Phase Steel	1549	(8)
Asim Bag
K. K. Ray
K. Aprameyan
E. S. Dwarakadasa
K. V. Sudhakar
Effect of Young's Modulus on Fatigue Crack Propagation Under Variable Loading	1557	(6)
H. Masuda
S. Matsuoka
Deformation and Fracture of a Titanium Alloy Under Bi-Axial Fatigue	1563	(8)
M. R. Bache
W. J. Evans
Dwell Fatigue on TI 6246 at Near Ambient Temperatures	1571	(8)
S. H. Spence
W. J. Evans
M. Cope
Influence of Microstructure on the Fatigue Crack Growth Behaviour of Titanium Alloys at High Temperature	1579	(8)
C. Sarrazin-Baudoux
S. Lesterlin
J. Petit
The Effect of Tempering Temperature on the High Cycle Fatigue Properties of High Strength Spring Steels	1587	(8)
K. A. Lee
W. J. Nam
S. J. Yoo
N. J. Kim
C. S. Lee
Fatigue Failure from Sub-Surface Defects in a Gas Turbine Disc Alloy at Elevated Temperature	1595	(8)
J. Byrne
N. Y. K. Kan
I. W. Hussey
G. F. Harrison
Effect of R Ratio on Fatigue Crack Growth Characteristics of Maraging Steel	1603	(10)
K. Hussain
A. Tauqir
A. Ul Haq
A. Q. Khan
Low Cycle Fatigue Crack Propagation Behavior of 1.5Cr-0.7Mo Steel at High Temperature	1613	(8)
S. H. Song
M. S. Kang
K. Y. Kim
Fatigue Crack Initiation and Growth of Stainless Steels in 3%NACL Solution	1621	(8)
M. Nakajima
Y. Akatsuka
K. Tokaji
Influence of Cryogenic Temperatures and Media on the Fatigue Failure Resistance of Al-Li Alloys	1629	(8)
V. A. Serdyuk
Yu A. Pokhil
Fatigue Crack Closure in Al-Li 2090 Alloy	1637	(8)
H. Y. Jung
S. D. Antolovich
Effects of Crystallographic Orientation on Fatigue Crack Growth in XXX-Titanium Single Crystals	1645	(8)
K. Takashima
Y. Mine
S. Ando
H. Tonda
Y. Higo
P. Bowen
The Effects of Localised Stress Field Near the Crack Tip on Fatigue Striation Alignment in Fe-3% Si Single Crystals	1653	(8)
Masayuki Shimojo
Yuzo Uchida
Yakichi Higo
Point Contact Surface Fatigue in Single Crystal and Polycrystalline Magnesium Oxide	1661	(8)
C. Maerky
J. L. Henshall
R. M. Hooper
M. -O. Guillou
Fatigue Crack Growth in Transformation Toughening Ceramics	1669	(8)
J. H. Andreasen
C. V. Moller
Fatigue Growth Behavior of Short Cracks in XXX/XXX-SiAION at 1200(XXX)C	1677	(8)
G. -D. Zhan
M. J. Reece
J. -L. Shi
T. -S. Yen
Fracture and Fatigue of Al(2)O(3)-Based Microsphere/6061-T6 Aluminium Metal Matrix Composite	1685	(8)
A. K. Hellier
A. Crosky
B. G. Park
Fatigue Crack Initiation and Growth in Titanium Alloy Matrix Composite	1693	(8)
T. Tagawa
E. Wadahara
T. Miyata
A Study of Fatigue Crack Propagation Mechanisms of a Non-Crystalline Polymer	1701	(8)
Y. Bokoi
Y. Shiraishi
Y. Higo
Fiber Orientation and Fatigue Behaviors of Short Glass Fiber-Filled Polymer Injection Welds	1709	(8)
Jae-kyoo Lim
Yon-Jig Kim
Evaluation of Fatigue Strength of Adhesive Bonded Box Section Beams	1717	(8)
N. Tomioka
M. Kakiage
Fatigue Properties of Thermal Sprayed Steel with Co-Based Self-Fluxing Alloy	1725	(8)
J. Komotori
N. Qu
M. Shimizu
K. Shirai
Fatigue Crack Growth Studies on Lug Joints	1733	(8)
K. Satish Kumar
B. Dattaguru
T. S. Ramamurthy
K. N. Raju
Rotating-Bending Fatigue of a TiNi Shape-Memory Alloy Wire	1741	(8)
H. Tobushi
T. Hachisuka
S. Yamada
P. H. Lin
Fatigue on Full Locked Coil Rope Under Bending in Tramways Systems	1749	(6)
G. Crespo
Z. Cassier
Volume 4	1755	(520)
Dedication to Professor George Irwin	1755	(2)
On the Origin of Joints in Sedimentary Rocks	1757	(10)
Genady P. Cherepanov
Computational Modelling of Concrete Fracture	1767	(12)
Rene de Borst
A More Concise Systematization of Unified Fracture Theory	1779	(12)
Takeo Yokobori
Application of the Griffith Energy Approach to Non-Classical Problems of Fracture	1791	(12)
L. V. Nikitin
Evolution Equations of Stable and Unstable Crack Propagation	1803	(8)
A. Neimitz
Three-Dimensional Crack-Face Weight Functions for the Semi-Infinite Interface Crack	1811	(12)
V. Lazarus
J. B. Leblond
New Developments of Boundary Element Methods in Fracture Mechanics	1823	(14)
J. Sladek
V. Sladek
J. Balas
Quasi-Brittle Fracture Analysis by a Symmetric Galerkin Boundary Element Method	1837	(12)
G. Maier
A. Frangi
Asymptotic Analysis in Fracture	1849	(12)
J. R. Willis
Cohesive Surface Modeling of Fast Crack Growth	1861	(12)
A. Needleman
New Directions: Analysis of Cracking Localization and Ultimate Strength of Structures in Civil Engineering	1873	(12)
H. Horii
J. Inoue
Computational Mechanics of Interfacial Fracture for Composite Debonding; and of Elastoplastic Fracture with Multi-Site-Damage	1885	(14)
S. N. Atluri
W. T. Chow
L. Wang
Some Results on the Onset and Growth of Interface Cracks	1899	(12)
Dominique Leguillon
Non-Classical Problems of Composite Failure	1911	(12)
A. N. Guz
A Topology Based System for Simulating 3D Crack Growth in Solid and Shell Structures	1923	(12)
B. J. Carter
C. -S. Chen
A. R. Ingraffea
P. A. Wawrzynek
A Cell Model for Ductile Fracture with Applications to the Transition Regime	1935	(12)
C. Fong Shih
Li Cheng
Jonas Faleskog
Xiaosheng Gao
Effects of an Electric Field on the Energy Release Rate: A Self-Consistent Analysis	1947	(12)
Tong-Yi Zhang
Cai-Fu Qian
Pin Tong
Non-Linear Deformed Interface Corner Stress Characterization by Effective Parallel Numerical Methods	1959	(12)
M. Scherzer
Strong Interaction Among Randomly Distributed Microcracks	1971	(8)
Wei Yang
Su-Lin Zhang
Teng Li
Particle Based Analysis of Fracture and Flow of Brittle Materials	1979	(2)
H. Sakaguchi
H. -B. Muhlhaus
Nonlinear Continuum and Atomistic Modeling of Dynamic Fracture Instabilities	1981	(2)
H. Gao
Limit Equilibrium of Elasto-Plastic Piecewise-Homogeneous Cylindrical Shells with Non-Through Cracks	1983	(8)
R. M. Kushnir
M. M. Nykolyshyn
V. A. Osadchuk
On the Full-Field Elastostatic Deformation of Cracks Using Non-Linear Finite Strain Analysis	1991	(8)
A. D. Nurse
Numerical Analysis of a Nonlocal Damage Model for Ductile Crack Growth	1999	(8)
M. Feucht
D. Gross
The Constraint of Elastic-Plastic Crack Tip Fields	2007	(8)
A. D. Karstensen
A. Nekkal
J. W. Hancock
Constraint Effects in Mixed Mode Loading	2015	(8)
J. W. Hancock
A. Nekkal
A. D. Karstensen
Variational Approach to Limit Load Evaluation in Framework of the Ideal Rigid Plastic Model Taking into Account Tensile Crack Formation	2023	(8)
S. E. Alexandrov
R. V. Goldstein
The Unified Equivalent Stress Intensity Factor K(0)	2031	(8)
K. W. Lo
T. Tamilselvan
Fracture Analysis of Cracked Spherical Shells	2039	(8)
Rong Liu
C. H. Wang
R. G. Bathgate
On Fracture of an Infinite Elastic Body in Compression Along a Cylindrical Defect	2047	(8)
A. N. Guz
Yu. I. Khoma
V. M. Nazarenko
Symmetric BEM for Fracture Mechanics of Thin Plates	2055	(8)
A. Frangi
G. Novati
Mixed-Phase Simulation with Fracture-Path Prediction Mode for Dynamically Curving Fracture	2063	(8)
Toshihisa Nishioka
Takashi Okada
Masahiro Nakatani
A Simple Method of J-Integral Estimate for Biaxially Stressed Mode I Cracks	2071	(8)
M. Sakane
T. Itoh
M. Ohnami
J Estimation for Cracked Cylinders Under Combined Thermal and Mechanical Loading	2079	(8)
S. Ignaccolo
B. Drubay
B. Michel
P. Gilles
A J-Integral Approach for Evaluating the Influence of Residual Stresses on Fracture Behavior	2087	(8)
M. Pereira
H. Wohlfahrt
F. Darwish
Thermal Stress Cleaving of a Thin Strip Using a Point Heat Source	2095	(8)
A. Saimoto
Y. Imai
H. Sawada
3D Singular Stresses in a Cracked Plate	2103	(8)
X. M. Su
C. T. Sun
A New Approach to Interacting 3D Cracks	2111	(8)
S. Pitt
Crack Growth Under Spatially Random Stress Fields	2119	(8)
A. V. Dyskin
An Embedded-Crack Finite Element Approach to Quasi-Brittle Fracture	2127	(8)
G. Bolzon
A. Corigliano
Stress Intensity Factor Histories for a 3D Crack Moving Steadily and Unsteadily	2135	(8)
Liu Chuntu
Li Xiangping
Crack Growth Path and SIF Distribution Studies in 3D Cases	2143	(8)
C. W. Smith
Three Dimensional Stress Analysis of Crack Patching	2151	(8)
R. J. Callinan
L. R. F. Rose
C. H. Wang
3D Finite Element Modelling of a Composite Patch Repair	2159	(8)
A. Mahadesh Kumar
Ripudaman Singh
Three Layer Technique for Bonded Composite Patch	2167	(8)
S. Naboulsi
S. Mall
3D Cracks Growth in Materials with Gas Emission in Bulk	2175	(8)
A. V. Balueva
Holonomic Analysis of Quasibrittle Fracture with Nonlinear Softening	2183	(8)
F. Tin-Loi
M. C. Ferris
Finite Deformation Analysis of Crack Growth in Elastic Body	2191	(8)
V. A. Levin
V. V. Lokhin
K. M. Zingerman
Computer Simulation of Brittle Crack Propagation and Arrest of Steel Plate with Temperature Gradient Based on Local Fracture Stress Criterion	2199	(12)
Susumu Machida
Hitoshi Yoshinari
Shuji Aihara
Using Mori-Tanaka Method for Effective Moduli of Cracked Thermopiezoelectric Materials	2211	(8)
Qing-Hua Qin
Show-Wen Yu
Branching Problem of a Crack and a Debonding at the end of a Clamped Edge of Thin Plate	2219	(8)
Norio Hasebe
Masahiro Miwa
Masaki Nakashima
Circular Rigid Punch with one Smooth and Another Sharp Ends on an Edge Cracked Matrix Acted by Concentrated Forces	2227	(8)
Jun Qian
Norio Hasebe
A Higher Order Fatigue Crack Paths Simulation by the MVCCI-Method	2235	(8)
H. Theilig
R. Doring
F. -G. Buchholz
On Creep Damage Evolution in Thin Plates	2243	(8)
H. Altenbach
K. Naumenko
The Equilibrium of Dilating Shear Crack with Rough Faces	2251	(8)
A. V. Dyskin
A. N. Galybin
Shear Fracture Mechanism in a Recycled Aluminium Alloy	2259	(8)
D. M. Li
A. Bakker
Coating Cracks in Materials Under an Antiplane Concentrated Load	2267	(8)
C. K. Chao
Volume 5	2275	(408)
Fracture of Materials with Strain Gradient Effects	2275	(12)
Y. Huang
L. Zhang
T. F. Guo
K. C. Hwang
Fatigue Design and Assessment of Welded Joints	2287	(12)
S. J. Maddox
Tensile Fracturing in Dynamic Compression	2299	(10)
Sia Nemat-Nasser
Status of Research Aimed at Predicting Structural Integrity	2309	(12)
W. G. Reuter
New Methods for Characterizing Fracture Toughness Behavior	2321	(12)
John D. Landes
Small Specimen Fracture Toughness Characterization - State of the Art and Beyond	2333	(12)
Kim Wallin
The Role of Weldment Interfaces in Fracture Mechanics Parameters Evaluation	2345	(12)
A. Sedmak
Defect Resistance of Thin Walled Pipeline Girthwelds	2357	(12)
G. F. Bowie
F. J. Barbaro
C. J. Moss
R. Denys
Some Problems on Modeling of Interface Fracture	2369	(8)
R. V. Goldstein
Mechanisms and Mechanics of Debond Fractures Along Metal Matrix Composite Interfaces	2377	(14)
A. S. Argon
M. L. Seleznev
C. F. Shih
X. H. Liu
Strange Multiple Crack Paths in Ductile Fracture	2391	(12)
A. G. Atkins
Some Unresolved Issues with Fatigue Crack Closure - Measurement, Mechanism and Interpretation Problems	2403	(12)
M. N. James
Fracture Toughness Evaluation of Advanced Materials by Instrumented Impact Testing System	2415	(8)
T. Kobayashi
Indentation Cracking of Brittle Coatings	2423	(10)
Henrik Myhre Jensen
Fracture of Adhesive Bonds Between Colloidal Spheres	2433	(8)
K. Kendall
W. Liang
C. Stainton
Experimental Investigation on Evolution Process of Dimpled Fracture	2441	(8)
Hong Youshi
Zheng Xiuhua
Effects of Weld Strength Mis-Match on CTOD Design Curve	2449	(6)
H. Xue
Y. W. Shi
A Modified CTOD Design Curve in Consideration of Mechanical Heterogeneity in Welds	2455	(8)
Yao-Wu Shi
The Measurement of Elevated Temperature J Integral Fracture Toughness in Low Alloy Steels	2463	(8)
Peter Nunn
Alan Hellier
Fracture Mode Tests of Ductile Cast Iron for Casks	2471	(8)
Akio Kosaki
Toshiari Saegusa
Determination of Blunting Line for Armco Iron Under Mixed Mode I/III Loading	2479	(8)
M. Srinivas
S. V. Kamat
P. Rama Rao
R-Curve Behaviour of Al-Li-Cu-Mg Alloys	2487	(8)
N. Eswara Prasad
M. Ramulu
G. Malakondaiah
True Shear and Mixed Mode Fracture Toughness Testing of Materials	2495	(8)
K. W. Lo
M. O. Lai
T. Tamilselvan
Notch Strength of Sintered Tungsten Alloys	2503	(8)
S. Kobayashi
Y. Mutoh
Y. Hosokai
Transgranular and Intergranular Fracture in Al-Si-Mg Casting Alloys	2511	(8)
Q. G. Wang
C. H. Caceres
J. R. Griffiths
Scatter in Cleavage Fracture Toughness Following Proof Loading	2519	(8)
H. Fowler
D. J. Smith
K. Bell
Influence of Stress Raisers on Copper Plate Fracture Under Uniaxial Tension Loading	2527	(8)
Ashraf T. Mohamed
Predictions of Residual Stresses Caused by Quenching Process in Aluminium 6351-T6 Gas Cylinder	2535	(8)
R. N. Ibrahim
Y. C. Lam
D. Ischenko
Macroscopic Evaluation of Localized Damage in Metal by Infrared Thermography	2543	(8)
H. Sakamoto
Comparison of Crack Closure Measurements Using Moire Interferometry and Results from a Dugdale-Type Crack Closure Model	2551	(8)
L. J. Fellows
D. Nowell
D. A. Hills
Determination of the Displacement Vector at the Crack Tip for Complex Kinds of Loading by the use of Holographic and Speckle Interferometry	2559	(6)
L. M. Lobanov
V. I. Kiryan
V. A. Pivtorak
G. V. Cherkashin
Inspection of Small Piping Containing Weld Flaws by Improved Ultrasonic Testing Technique	2565	(8)
Zhen-Guo Yang
Le-Min Ni
Lin Mei
A Study of Testing Method and Mechanisms of Stress Corrosion Cracking Performed on Stainless Steel	2573	(8)
H. X. Zhao
K. Seto
M. Matsumura
Fatigue and Quantitative Fractography of an AL-6061 Matrix Composite	2581	(6)
B. R. Crawford
J. R. Griffiths
Analysis of Fatigue Mechanism in Locked Coil Wire Ropes by Means of Fractography	2587	(8)
Jarmila Woodtli
Christian Hellwig
Borehole in situ Indentation Tests in Floating Sea Ice at High Temperatures (>0.97 T(m))	2595	(8)
Nirmal K. Sinha
Vibration Based Detection of Location and Size of Edge Crack in Beams on Multiple Supports	2603	(8)
B. P. Nandwana
S. K. Maiti
Vibration Measurement of an Edge Cracked Composite Plate by Amplitude Fluctuation ESPI Method	2611	(8)
Wei-Chung Wang
Chi-Hung Hwang
Effects of a Thin Film on Screw Dislocation and Dislocation Dipole Emission	2619	(8)
Tong-Yi Zhang
Cai-Fu Qian
On Interface Crack Growth and the Criterion to Determine the Direction of Ductile Crack Propagation	2627	(8)
S. Hao
W. Brocks
M. Kocak
K. -H. Schwalbe
Shielding Mechanisms in Mixed Mode Interfacial Fracture	2635	(8)
J. G. Swadener
K. M. Liechti
The Effect of T Stress on the Near Tip Stress Field of an Elastic-Plastic Interface Crack	2643	(8)
Z. L. Zhang
M. Hauge
C. Thaulow
On the Modelling of Interface Crack Yielding Zones	2651	(6)
Alla Sheveleva
Role of Mode Mixity on 3D Stress Variations Near Interfacial Cracks	2657	(10)
J. K. Sinha
H. V. Tippur
A Method to Determine Constitutive Properties of Thin Interface Layers Loaded in Shear	2667	(8)
K. S. Alfredsson
U. Stigh
Engineering Treatment Model (ETM) for Creep Crack Driving Force Estimation	2675	(8)
Li Zhonghua
W. Brocks
K.-H. Schwalbe
Volume 6	2683
Dedication to Professors Max and Mel Williams	2683	(2)
Unstable Neck Formation as a Precursor to Ductile Fracture During High-Rate Planar Extension	2685	(12)
L. B. Freund
N. J. Sorensen
Issues in Dynamic Crack Propagation	2697	(10)
F. Nilsson
Dynamics of Brittle Fracture	2707	(14)
K. Ravi-Chandar
3D Dynamic Interaction of Cracks Under Impact Loading	2721	(10)
D. Gross
B. Chen
Wave Resistance in Crack Propagation: Lattices and Homogeneous Structured Media	2731	(12)
L. I. Slepyan
High Strain Rate Fracture and Impact Mechanics	2743	(12)
I. Maekawa
Constitutive Modelling of High Strain-Rate Deformation: Application to Adiabatic Shear Banding	2755	(16)
Y. Estrin
A. Molinari
Thermal Spalling of Rock	2771	(12)
L. N. Germanovich
Roughness Development During Dynamic Fracture in Brittle Polymer	2783	(12)
K. Takahashi
M. Kido
Structural Transitions in Ensembles of Defects as Mechanisms of Failure and Plastic Instability Under Impact Loading	2795	(12)
O. Naimark
Investigations in Terradynamics	2807	(10)
I. V. Simonov
Quasi-Atomistic Models of Fracture and Plasticity	2817	(8)
R. Miller
M. Ortiz
R. Phillips
V. Shenoy
E. B. Tadmor
High Speed Fracture in Polymers and Composites	2825	(10)
J. G. Williams
Failure of Multiphase Polymeric Materials	2835	(10)
H. H. Kausch
Ph. Beguelin
A. Fan Lu
Ch. Plummer
Ch. Fond
R. Schirrer
Some Dynamic Problems of Structural Fracture Mechanics	2845	(8)
N. F. Morozov
Y. V. Petrov
Analysis of Dynamic Crack Propagation	2853	(8)
Masaaki Watanabe
Transient Surface Responses of a Cracked Half-Plane	2861	(8)
M. K. Kuo
Z. B. Cheng
Dynamic Stress Concentration due to an Oblate Spheroidal Inhomogeneity	2869	(8)
Ratnam Paskaramoorthy
Dynamic Crack Propagation Analysis by a Boundary Integral Equation Method	2877	(8)
Th. Seelig
D. Gross
Dynamic Analysis of a Propagating Interface Crack	2885	(8)
Y. S. Ing
C. C. Ma
Dynamic Interfacial Cracking of Thermomechanically Loaded Two-Phase Compounds	2893	(8)
K. P. Herrmann
A. Noe
Fast Fracture of Inclined Interfaces: Subsonic Regime	2901	(8)
Arun Shukla
Mahesh Kavaturu
Stress Pulse Loading of a Stationary Crack: Experimental and Numerical Investigation of the Displacement Field	2909	(8)
J. M. Huntley
M. B. Whitworth
Blast-Induced Fracturing Around Boreholes and Gas-Pressurised Rapid Crack Extension	2917	(8)
A. Daehnke
N. Kouzniak
H. P. Rossmanith
R. E. Knasmillner
Optical Measurement of Stress Waves and Rapid Crack Propagation in the Time Domain of Microseconds	2925	(8)
S. Suzuki
Y. Nozaki
H. Kimura
A Probabilistic Approach for Dynamic Fragmentation of Ceramics Under Impact Loading	2933	(8)
C. Denoual
F. Hild
C. Cottenot
On Mixed-Mode Dynamic Crack Initiation in Brittle Solids	2941	(8)
D. Rittel
H. Maigre
Dynamical Systems and the Rate-Dependence of Cracked Medium	2949	(8)
Peter B. Beda
Some Topological Aspects of Transition from Damage to Fracture as Non-Linear Problem of Microcrack Accumulation	2957	(8)
M. Davydova
Dynamic Ductile Fracture of Aluminium SEN Specimens an Experimental-Numerical Analysis	2965	(8)
Jonghee Lee
Matthew T. Kokaly
Albert S. Kobayashi
Impact and Fracture Toughness Properties of Mild and High Tensile Steels	2973	(8)
Dr M. Ayoub
Dynamic Fracture Mode Analysis of Glass Matrix Composites	2981	(6)
M. Enoki
H. Fujita
T. Kishi
Impact Fracture Process of Plain Concrete with Large Size Aggregates by Means of Hopkinson Bar Bundle	2987	(8)
C. Albertini
E. Cadoni
K. Labibes
Time Dependent Deformation Behaviors and Fatigue of Si(3)N(4) Ceramics at Elevated Temperatures	2995	(8)
K. Hatanaka
K. Oshita
H. Shiota
Cohesive Force Distribution of Crack Tip Crazes in Fatigue of PMMA	3003	(8)
Wolfgang G. Knauss
Time and Stress Effects on the Surface Morphology of PMMA Under Fatigue	3011	(8)
Guillermo C. Pulos
Constitutive Equations for Special Linear Viscoelastic Composites with Growing Damage	3019	(10)
R. A. Schapery
Temperature Dependent Crack Growth Behavior Below T(G) in an Epoxy Strip	3029	(8)
K. Ogawa
A. Misawa
M. Takashi
Relation Between Slip and Energy Dissipation in Viscoelastic Adhesives	3037	(4)
Hugh R. Brown
Manoj K. Chaudhury
Bi-Min Newby
Mixed-Mode Resistance Curve Behavior of Structural Adhesively Bonded Joints	3041	(8)
K. M. Liechti
J. H. Shah
Fracture Toughness and Critical Pressure Evaluations for Polyethylene Pipelines; a Computational Methodology and Experimental Validation	3049	(8)
P. E. O'Donoghue
Strip Yielding in a Constrained Layer	3057	(8)
C. H. Wang
Nanomechanical Fracture-Testing of Phenol-Formaldehyde Thin Films	3065	(10)
D. A. Boismier
M. K. Kriese
W. W. Gerberich
Characterizing the Fracture of Tantalum Nitride Films on A1N Substrates Through Film Thickness Effects	3075	(8)
N. R. Moody
D. Medlin
D. P. Norwood
Atomistic Finite Element Models of Deformation and Fracture at Nanoscales	3083	(2)
Patrick Klein
Kristina Pawlikowsky
Huajian Gao
Dislocation Emission from a Three-Dimensional Crack - a Large-Scale Molecular Dynamics Study	3085	(10)
S. J. Zhou
D. M. Beazley
P. S. Lomdahl
A. F. Voter
B. L. Holian
Micromechanics Measurements Applied to Integrated Circuit Microelectronics	3095	(12)
David R. Clarke
"Fracture Electronics" - Application of Fracture Mechanics to Microelectronic Systems and Chip Packages	3107	(6)
B. Michel
T. Winkler
H. Reichl
Atomistic Calculations of Dislocation Locks: Effects of Hydrogen	3113	(2)
T. Tsuji
M. I. Baskes
R. G. Hoagland
N. R. Moody
Energy Dissipation Mechanisms at Copolymer Toughened Polymer Interfaces	3115	(2)
R. Brown
B. Bernard
T. P. Russell
Influences of Interfacial Adhesion on Thin Film Mechanical Property Measurement by Nanoindentation	3117	(2)
G. M. Pharr
T. Y. Tsui
C. A. Ross
Interfacial and Near-Interfacial Fracture in Ceramic/Metal Layered Systems	3119	(2)
R. O. Ritchie
R. M. Cannon
J. M. McNaney
Control and Measurement of Interface Strength in the Niobium-Aluminium Oxide System Using Ion Beam Assisted Deposition	3121	(2)
G. S. Was
H. Ji
N. Moody
Effects of Plasticity on Toughness Measurements in Laminated Systems	3123
M. D. Thouless
Index of Contributors	I1