Note: Supplemental materials are not guaranteed with Rental or Used book purchases.
Purchase Benefits
What is included with this book?
Introduction | p. 2 |
A Simple Lift-Lid Box | p. 4 |
Prepare the stock | p. 6 |
Mark and cut the box sides | p. 9 |
Fit the box bottom | p. 12 |
Assemble the box | p. 14 |
Add keys to the corners | p. 16 |
Make a lift lid | p. 19 |
Final touches | p. 20 |
A Rustic Treasure Box | p. 23 |
Cut the parts to size | p. 26 |
Cut the corner joints | p. 27 |
Make and fit the bottom | p. 30 |
Assemble the box | p. 32 |
Add a lid | p. 33 |
Prepare for final assembly | p. 34 |
Attach the hinge | p. 35 |
A Sliding-Top Pencil Box | p. 38 |
Prepare the stock | p. 40 |
Cut the joints | p. 41 |
Rout a groove to house the bottom | p. 44 |
Make the bottom panel | p. 45 |
Groove the sides to accommodate the top | p. 47 |
Assemble the box | p. 48 |
Fit and shape the lid | p. 49 |
Install the lid stop | p. 50 |
A Stationery Box with Hidden Splines | p. 53 |
Prepare the stock | p. 55 |
Miter the corners | p. 59 |
Fit the raised panel | p. 60 |
Cut the hidden-spline joinery | p. 62 |
Prepare the inside before assembly | p. 66 |
Glue up the box | p. 67 |
Cut the lid loose from the base | p. 68 |
Make and assemble the base frame | p. 69 |
Add pulls to the box | p. 71 |
Install tray supports and lid keeper strips | p. 74 |
Make the sliding tray | p. 76 |
Sanding, finishing, and final assembly | p. 77 |
A Lap-Cornered Box | p. 80 |
Begin with book-matched stock | p. 32 |
Mark and cut the lap-corner joints | p. 84 |
Assemble the sides | p. 90 |
Make the lid and base | p. 90 |
Shape the lid and base | p. 92 |
Finish the box | p. 92 |
A Fold-Out Jewelry Box | p. 96 |
Prepare the stock | p. 99 |
Miter the sides | p. 100 |
Cut grooves to house the bottom panels | p. 101 |
Make the top panel | p. 102 |
Shape the sides | p. 103 |
Sand the interior | p. 104 |
Assemble the box | p. 104 |
Cut and install miter keys | p. 105 |
Cut the lid and levels apart | p. 108 |
Fit the support arms | p. 108 |
Make the rear support | p. 110 |
Make the dividers | p. 111 |
Sand, finish, and assemble | p. 112 |
Hinge the lid | p. 114 |
Cut and install a lining | p. 115 |
A Jewelry Box with a Sliding Tray | p. 118 |
Prepare the stock | p. 120 |
Cut miters for the lid and base | p. 121 |
Fit panels in the bottom and lid | p. 122 |
Cut the top and bottom panels to fit | p. 123 |
Assemble the sides and lid | p. 124 |
Make the top panel | p. 126 |
Cut the slots and install the keys | p. 127 |
Rout a finger grip | p. 129 |
Making a sliding tray | p. 130 |
Make the dividers | p. 132 |
Ease hinge installation with a flipping story stick | p. 133 |
Install the hinges | p. 136 |
Final finishing steps | p. 136 |
A Dovetailed Box with a Wooden Hinge | p. 138 |
Cutting dovetails starts with tails | p. 140 |
Assemble the box | p. 144 |
Build a frame-and-panel base | p. 145 |
Make the lid | p. 146 |
Install the hinges | p. 148 |
Finishing touches | p. 149 |
Table of Contents provided by Ingram. All Rights Reserved. |
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.