CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy)

by Kotfila, David; Moorhouse, Joshua; Wolfson, Ross

• ISBN13: 9781587132131
• ISBN10: 1587132133
• Edition: 1st
• Format: Paperback
• Copyright: 2008-01-01
• Publisher: Cisco Press

Summary

CCNPBuildingScalable Internetworks (BSCI 642-901) Lab Portfolioprovides you with opportunities for hands-on practice to master the technologies necessary to configure advanced routing on a production network. The labs reinforce your understanding of how to install, configure, monitor, and troubleshoot network infrastructure equipment. You will apply your knowledge of configuration of EIGRP, OSPF, IS-IS, and BGP routing protocols and how to manipulate and optimize routing updates between these protocols. Other topics covered include multicast routing, IPv6, and DHCP configuration. Those preparing for the Building Scalable Cisco Internetworks (BSCI 642-901) certification exam should work through this book cover-to-cover. Or if you need to quickly review configuration examples, you can go directly to the relevant chapter. CCNPBuildingScalable Internetworks (BSCI 642-901) Lab Portfolioincludes 33 Labs built to support v5 of the Building Scalable Internetworks course within the Ciscoreg; Networking Academyreg; curriculum providing ample opportunity to practice. 6 Challenge and Troubleshooting Labs have been added to the Lab Portfolio to further test your mastery of the topics. 4 Case Studies provide practice in planning, designing, and implementing EIGRP, OSPF, and BGP networks. Even if you do not have the actual equipment to configure these more complex topologies, it is worth reading through these labs to expand your thinking into more complex networking solutions. By successfully completing the exercises in this book you will gain the experience necessary to use advanced IP addressing and routing in implementing scalability for Cisco integrated services routers (ISR) connected to LANs and WANs.

Table of Contents

Scalable Network Design	p. 1
BSCI Lab Configuration Guide (1.5.1)	p. 1
TCL Script Reference and Demonstration (1.5.1)	p. 3
Quick TCL Reference	p. 3
Step 1	p. 4
Step 2	p. 5
Step 3	p. 14
EIGRP	p. 15
EIGRP Configuration, Bandwidth, and Adjacencies (2.7.1)	p. 15
Scenario	p. 15
Step 1	p. 16
Step 2	p. 17
Step 3	p. 19
Step 4	p. 20
Step 5	p. 22
Challenge: Topology Change	p. 23
EIGRP Load Balancing (2.7.2)	p. 26
Scenario	p. 26
Step 1	p. 26
Step 2	p. 29
Step 3	p. 32
Step 4	p. 34
Step 5	p. 35
Step 6	p. 38
Initial Configurations	p. 45
TCL Script Output	p. 47
Summarization and Default Network Advertisement (2.7.3)	p. 53
Scenario	p. 53
Step 1	p. 54
Step 2	p. 57
Step 3	p. 61
Step 4	p. 70
Step 5	p. 72
Conclusion	p. 77
TCL Script Output	p. 79
Analyzing Major Networks	p. 86
EIGRP Frame Relay Hub and Spoke: Router Used as Frame Switch (2.7.4)	p. 89
Scenario	p. 90
Step 1	p. 90
Step 2	p. 91
Step 3	p. 92
Step 4	p. 94
Step 5	p. 95
Step 6	p. 99
Step 7	p. 100
TCL Script Output	p. 102
EIGRP Frame Relay Hub and Spoke: Adtran Used as Frame Switch (2.7.4)	p. 110
Scenario	p. 111
Step 1	p. 111
Step 2	p. 112
Step 3	p. 113
Step 4	p. 114
Step 5	p. 115
Step 6	p. 119
Step 7	p. 120
TCL Script Output	p. 122
EIGRP Authentication and Timers (2.7.5)	p. 131
Scenario	p. 131
Step 1	p. 131
Step 2	p. 133
Step 3	p. 134
Step 4	p. 135
Table of Contents provided by Publisher. All Rights Reserved.