Computer Engineering in Applied Electromagnetism

by Wiak, S.; Krawczyk, Andrzej; Trlep, M.

• ISBN13: 9781402031687
• ISBN10: 1402031688
• Format: Hardcover
• Copyright: 2005-05-16
• Publisher: Kluwer Academic Pub

Summary

Computer Engineering in Applied Electromagnetism contains papers which were presented at the International Symposium on Electromagnetic Fields in Electrical Engineering, held in Maribor, Slovenia, 18-20 September 2003. It consists of three parts, Computational Techniques, Electromagnetic Engineering, and Special Applications. The contributions selected for the book cover a wide spectrum of theory and practice, being simultaneously of high theoretical level and deeply rooted in engineering problems. Thus, this volume touches on what is of key importance in electromagnetism.

Table of Contents

Preface	ix
S. Wiak
A. Krawczyk
M. Triep
Invited Paper Computational Electromagnetics: A Tool, an Art or Black Magic?	3	(8)
J.K. Sykulski
I. Computational Techniques
Introductory Remarks	11	(2)
S. Wiak
A. Krawczyk
M. Trlep
Study of the Electromagnetic Field Induced by Currents Flowing in the Circular Conductors	13	(6)
S. Apanasewicz
S. Pawlowski
Improvement of Effectiveness of High-Current Lines Optimization by Modification of Genetic Algorithms and Paralleling of the Computation Process	19	(6)
K. Bednarek
Shape Optimization with Adaptive Simulated Annealing and Genetic Algorithms	25	(6)
H. Brauer
M. Ziolkowski
The Design of Optimised Planar Thick Film Filters	31	(4)
V. Desnica
Lj. Zivanov
O. Aleksic
M. Lukovic
L. Lukic
Active Shielding Optimisation	35	(6)
P. Dessante
J.C. Vannier
B. Bonafos
Cost-Effective Optimal Design of Screens in Power Transformers	41	(6)
P. DiBarba
M.E. Mognaschi
A. Savini
J. Turowski
A Comparison of Error Estimators for Adaptive MESH Refinement for Electromagnetic 2D/3D Problems	47	(6)
K. Gawrylczyk
F. Alkhatib
Multi-Objective Optimization of Permanent Magnet Motor Using Taguchi Method	53	(6)
K. Hot
P. Bodlovic
Optimization of Barrier Type SRMs with Response Surface Methodology Combined with Moving Least Square Method	59	(6)
Y.K. Kim
J.Y. Lee
J.P. Hong
J. Hur
The Advanced Methods of Interaction and Data Analyze in the Visualization System for Electromagnetic Fields	65	(6)
A. Krolewiak
E. Napieralska-Juszczak
M. Pietruszka
Imaging of Two-Dimensional Current Density Distributions from their Magnetic Field	71	(6)
G. Krukowski
S. Gratkowski
R. Sikora
Some Applications of the Coupled Field-Circuit Method	77	(6)
E. Napieralska-Juszczak
T. Niewierowicz
L. Kawecki
Permanent Magnet Dealt with Boundary-Integral Approach	83	(6)
K. Pawluk
Comparison of the General Load Line Method with the Finite Element Method	89	(6)
R.I. Roman B.
A. Konrad
J.F. Brudny
Optimization for High Voltage Composite Insulators Using Experimental Design Theory	95	(4)
I. Sebestyen
Modelling and Optimisation of Intelligent Electrostatic Comb Accelerometer	99	(6)
S. Wiak
K. Smolka
M. Rudnicki
The Optimal Design of Passive Shimming Elements for High Homogeneous Permanent Magnets Utilizing Sensitivity Analysis	105	(6)
Y. Yao
C.S. Koh
G. Ni
S. Yang
D. Xie
Reconstruction of the Interface Between Two Conducting Fluids with Modified Genetic Algorithms	111	(8)
M. Ziolkowski
H. Brauer
M. Kuilekov
II. Electromagnetic Engineering
Introductory remarks	117	(2)
S. Wiak
A. Krawczyk
M. Trlep
On the Use of the Current and Flux State Variables in the Dynamic Analysis of Magnetoelectric Networks	119	(6)
A. G. Beccuti
S. Leva
A.P. Morando
Calculation of Linear Motor Performance Using Finite Element Method	125	(4)
M. Bugeza
D. Makuc
R. Fiser
Analytical Model of the Magnetic Field in Doubly Slotted Electrical Machines with Distributed Windings and Evaluation of E.M.F. and Torque	129	(8)
A. Di Gerlando
G.M. Foglia
R. Perini
The 3D-Analysis of the Field Distribution of Fractional Power Induction Motor	137	(6)
K. Komeza
M. Dems
P. Jastrzabek
Improvement of the Electric Strength of an Insulation System of a Medium Voltage Instrument Transformer Using Field Analysis	143	(6)
E. Lesniewska
A Method for Reduction of Cogging Torque in PM Machines Using Stepped Magnets	149	(6)
M. Lukaniszyn
R. Wrobel
M. Jagiela
Electric Field Analysis of the Insulation Structure of Power Transformer	155	(6)
D. Makuc
J. Ikanonic
K. Lenasi
A Study on Improvement in Energy Efficiency of Skeleton Type Single-Phase PM Motor Using Finite Element Method	161	(4)
T. Masuda
Y. Takashima
M. Murase
Y. Kawase
T. Yamaguchi
T. Okouchi
Analysis of Characteristics of Induction Motor by Three-Dimensional Axi-Symmetric Finite Element Method	165	(6)
T. Matsusaka
K. Harada
Y. Ishihara
T. Todaka
S. Kitamura
T. Shimomura
An Influence of Permanent Magnet Shape on the Torque Ripple of Disc-Type Brushless DC Motors	171	(6)
E.A. Mendrela
M. Jagiela
R. Wrobel
Analysis of Magnetization Characteristics of HTS Bulk Rotor in a Rotating Magnetic Field	177	(6)
T. Nakamura
H.J. Jung
N. Tanaka
I. Muta
K. Fukui
Equivalent Circuit Analysis of Pole-Change Single-Phase Induction Motor Considering Harmonic Components	183	(6)
H. Nam
S.K. Jung
J.P. Hong
The 3D Dynamic Simulation of the Inverter Fed Electromechanical Actuators Including Eddy Currents	189	(4)
L. Nowak
An Optimal Determination of Stranded Wires Used in Windings of Switched Mode Power Transformers	193	(4)
F. Pavlovcic
K. Lenasi
J. Nastran
Chart and Expressions for Eddy Current Losses Calculation in Steel Laminations Derived from Finite Element Numerical Results in 2D	197	(6)
P.G. Pereirinha
C.F.R. Lemos Antunes
AC Motor Magnetic Signature: Contribution of Stator Laminations	203	(6)
D. Roger
A. Henneton
A Comparison Between Surface Magnets and Embedded Magnets in Fractional Slot Wound PM Motors	209	(6)
P. Salminen
J. Pyrhonen
M. Niemela
Evaluation of New Surface Mounted Permanent Magnet Synchronous Machine with Finite Element Calculations	215	(6)
T. Schneider
A. Binder
Numerical Analysis of the Brushless Motor Magnetic Field and Torque	221	(6)
I. Ticar
A. Stermecki
I. Zagradisnik
Magnetic Field and Short-Circuit Reactance Calculation of the 3-Phase Transformer with Symmetrical Amorphous Core	227	(4)
B. Tomczuk
K. Zakrzewski
D. Koteras
Analysis of Instantaneous Voltage Distribution in Permanent Magnet Brushless Generator	231	(6)
B. Wawrzyniak
P. Witczak
Development of Mathematical Model and Computation of Electromagnetic Drum-Type Separator by Boundary Element Method	237	(8)
M.V. Zagirnyak
O.S. Akimov
III. Special Applications
Introductory remarks	243	(2)
S. Wiak
A. Krawczyk
M. Trlep
The Rotational Power Loss Calculation in the Square Sample	245	(6)
W. Anuszczyk
Z. Gmyrek
A Method for Studying the Current Field Generated by Interconnected Grounding Systems	251	(6)
M. Bronzini
G. Delvecchio
N. Mitaritonna
P. Pugliese
M. Sylos Labini
The Comparison of Phantom Model and Simulation Results in SAR Analysis	257	(4)
K. Ciosk
A. Krawczyk
R. Kubacki
Electric Circuit Representation of a Magnetic Circuit with Hysteresis	261	(6)
L. Cristaldi
S. Leva
A. P. Morando
Simulation of 3D End Effects in a Superconductive Magnet with a Ferromagnetic Core	267	(6)
H. DeGersem
T. Weiland
Modelling of Temperature-Dependent Effective Impedance of Nonferromagnetic Massive Conductor	273	(6)
I. Dolezel
L. Musil
B. Ulrych
The Magnetic Noise of a DC Electric Motor -- Modeling of Three-Times-Coupled Electromagnetic, Mechanical and Acoustic Phenomena	279	(8)
M. Furlan
M. Boltezar
Measurement of 2-D Magnetic Properties of Grain Oriented Silicon Steel Sheet Using RRSST	287	(6)
V. Gorican
M. Jesenik
A. Hamler
B. Stumberger
M. Trlep
The Heat Circumstances in Switch by Permanent Load	293	(4)
G. Hrovat
A. Hamler
Eddy Current Effects in the Sample of 2D R.R.S.S.T. and the Sample of 2D S.R.S.S.T.	297	(4)
M. Jesenik
V. Gorican
M. Trlep
A. Hamler
B. Stumberger
3-D Finite Element Analysis of Attractive Force by Residual Magnetization of DC Electromagnets	301	(4)
Y. Kawase
T. Yamaguchi
K. Iwashita
Characteristic Comparisons Between Iron Powder Materials and Lamination Cores in Brushless Motors	305	(6)
Y.K. Kim
J.P. Hong
K.H. Ha
J. Hur
H.K. Sung
Electroheating in Surface Treatment Process	311	(6)
K. Kurek
D. Dolega
Magnetodynamic Performance in Cage Induction Motors with a Broken Bar	317	(6)
X. M. Lopez-Fernandez
M. Piper
Soft Magnetic Composite in Design of Motor With Oscillatory Starting	323	(6)
D. Miljavec
B. Sustarsic
Z. Turk
K. Lenasi
Analysis of Core Loss in Variable Reluctance Permanent-Magnet Motors	329	(4)
H. Oztura
A Novel Axial Flux Permanent Magnet Machine to Laboratory Use	333	(4)
A. Parviainen
M. Niemela
J. Pyrhonen
Electromagnetic Hyperthermia -- Foundation and Computer Modelling	337	(6)
J. Plewako
A. Krawczyk
B. Grochowicz
2D FEM Analysis of 3D Magnetic Structures by Using Topological Transformations. Application to the Design of a Micro-Relay	343	(6)
J. Roger-Folch
E. Gomez
M. Riera
V. Lazaro
Health Effects of Base Stations	349	(6)
O. Sahin
Two Dimensional Finite-Element Simulation of a High Temperature Superconducting Synchronous Generator During Three-Phase Short-Circuit Fault Condition Using Full Transient Non-Linear Rotating Machine Model	355	(4)
K.S. Ship
K.F. Goddard
J.K. Sykulski
Coupled Electromagnetic Fields and Temperature Fields to Analyze the Voltage Fluctuation of a Synchronous Generator with the Consideration of Insulation Layers	359	(6)
L. Weili
Z. Feng
Z. Dong
H. Yunpeng
D. Shuye
Magnetic Diagnosis of Structural Materials and These Monte-Carlo Simulations	365
K. Yamada
B. Liu
A. Shinagawa
Z. Honda
Y. Isobe
K. Yamaguchi
A. Krawczyk