Corrosion Resistance of Steels, Nickel Alloys, and Zinc in Aqueous Media Waste Water, Seawater, Drinking Water, High-Purity Water

by Schütze, Michael; Roche, Marcel; Bender, Roman

• ISBN13: 9783527340699
• ISBN10: 3527340696
• Edition: 1st
• Format: Hardcover
• Copyright: 2016-01-05
• Publisher: Wiley-VCH

Summary

This handbook is derived from the online reference "Corrosion Handbook", bringing together the relevant information about corrosion protection and prevention for steels, one of the most widely used materials. It provides comprehensive information, including tabulated data and references, on the corrosion properties of the following materials:
Unalloyed steels and cast steel, unalloyed cast iron, high-alloy cast iron, high-silicon cast iron, structural steels with up to 12% chromium, ferritic chromium steels with more than 12% chromium, ferritic-austenitic steels with more than 12% chromium, high-alloy multiphase steels, ferritic/perlitic-martensitic steels, ferritic-austenitic steels/duplex steels, austenitic chromium-nickel steels, austenitic chromium-nickel-molybdenum steels, austenitic chromium-nickel steels with special alloying additions, special iron-based alloys, and zinc.
The following corrosive media are considered: Seawater, brackish water, industrial waste water, municipal waste water, drinking water, high-purity water.

Author Biography

Michael Schütze, born in 1952, studied materials sciences at the University of Erlangen-Nürnberg from 1972 to 1978, then joined the Karl Winnacker Institute of the DECHEMA as a research associate. He received his doctorate in engineering sciences from the RWTH (Technical University) in Aachen in 1983, completed his habilitation in 1991, becoming a member of the external teaching staff of the RWTH. Since 1998, he holds a professorship there. He was appointed director of the Karl Winnacker Institute in 1996 and Chairman of the executive board of DECHEMA Forschungsinstitut in 2012. He is recipient of the Friedrich-Wilhelm-Prize, the Rahmel-Schwenk medal, the Otto-von-Guericke Prize, the Cavallaro medal, the U.R. Evans Award, the Khwarizmi Award and the UNIDO Award, past Chairman of the Gordon Conference on Corrosion, editor of the journal Materials and Corrosion, Past-President of the European Federation of Corrosion, Past-President of the World Corrosion Organization and Chairman of the Working Party Corrosion by Hot Gases and Combustion Products of the European Federation of Corrosion.

Marcel Roche, born in 1945, received his diplomas in Chemical Engineering from the Institut National des Sciences Appliquées of Lyon in 1967 and in Refining and Chemical Engineering from the Ecole Nationale Supérieure du Pétrole et des Moteurs in 1968. He worked as a corrosion engineer for the Institut Français de Pétrole and Technip Engineering from 1970 to 1979, when he moved to the Corrosion Department of Elf Aquitaine. He spent the remainder of his career in the field of Corrosion, Inspection and Materials in this Group which became TotalFinaElf and finally Total. He retired in June 2008 and became a corrosion consultant. Since July 2011, he is President of CEFRACOR, the French Corrosion Society, and of its department Conseil Français de la Protection Cathodique. He is a member of the Scientific and Technical Advisory Committee of the European Federation of Corrosion and a member of its Board of Administrators, representing France. He has been active in several European and international standardisation working groups, including CEN TC219 WG3 for cathodic protection in marine applications for which he has been Convenor from 2009 to 2014.

Roman Bender, born in 1971, studied chemistry at the Justus Liebig University of Giessen from 1992 to 1997. After he received his diploma he joined the Karl Winnacker Institute of the DECHEMA in Frankfurt (Main) as a research associate. Since 2000 he is head of the group materials and corrosion at the DECHEMA and editor in chief of the world's largest corrosion data collection, the DECHEMA Werkstofftabelle, and the Corrosion Handbook. In 2001 he received his doctorate in natural sciences from the Technical University of Aachen (RWTH Aachen). In 2008 Dr. Bender was appointed chief executive officer of the GfKORR - The Society for Corrosion Protection. As well, in 2013 he has been appointed as the Scientific Secretary of the European Federation of Corrosion.

Table of Contents

Preface IX

How to use the Handbook XI

Warranty disclaimer 1

High Purity Water 3

Introduction 3

Physical and chemical properties 4

Unalloyed and low alloyed steels/Cast steel 6

Non-alloyed cast iron 21

High-alloyed cast iron 22

Ferritic chromium steels with < 13% Cr 22

Ferritic chromium steels with ‡ 13% Cr 24

High-alloyed multiphase steels 26

Austenitic CrNi steels 27

Austenitic CrNiMo(N)steels 52

Nickel 56

Nickel-chromium alloys 56

Nickel-chromium-iron alloys (without Mo) 56

Nickel-chromium-molybdenum alloys 67

Nickel-copper alloys 67

Nickel-molybdenum alloys 68

Zinc 68

Bibliography 69

Drinking Water 81

Introduction 82

Unalloyed steels and cast steel 87

Unalloyed cast iron 102

Structural steels with up to 12% chromium 104

Ferritic chromium steels with more than 12% chromium 104

Ferritic-austenitic steels with more than 12% chromium 104

Austenitic chromium-nickel steels 104

Austenitic chromium-nickel-molybdenum steels 104

Austenitic chromium-nickel steels with special alloying additions 104

Zinc 112

Bibliography 147

Seawater 155

Introduction 155

Unalloyed and low-alloyed steels/cast steel 193

Unalloyed cast iron and low-alloy cast iron 224

High-alloy cast iron 226

Ferritic chromium steels with < 13% Cr 228

Ferritic chromium steels with ‡13% Cr 229

High-alloy multiphase steels 235

Ferritic/pearlitic-martensitic steels 235

Ferritic-austenitic steels/duplex steels 235

Austenitic CrNi steels 237

Austenitic CrNiMo(N) steels 239

Austenitic CrNiMoCu(N) steels 244

Nickel 260

Nickel-chromium alloys 262

Nickel-chromium-iron alloys (without Mo) 262

Nickel-chromium-molybdenum alloys 262

Nickel-copper alloys 263

Nickel-molybdenum alloys 270

Other nickel alloys 270

Zinc 270

Bibliography 273

Waste Water (Municipal) 289

Introduction 290

Unalloyed steels and cast steel 292

Unalloyed cast iron 294

Ferritic chromium steels with more than 12% chromium 299

Ferritic austenitic steels with more than 12% chromium 299

Austenitic CrNi steels 299

Austenitic CrNiMo(N) steels 299

Austenitic CrNiMoCu(N)-steels 299

Zinc 305

Bibliography 307

Waste Water (Industrial) 311

Introduction 311

Unalloyed steels and low-alloy steels/cast steel 312

Unalloyed cast iron and low-alloy cast iron 316

High-alloy cast iron 316

Silicon cast iron 316

Ferritic chromium steels with < 13 % Cr 320

Ferritic chromium steels with ‡ 13 % Cr 320

High-alloy multiphase steels 320

Ferritic/pearlitic-martensitic steels 320

Ferritic-austenitic steels/duplex steels 320

Austenitic CrNi steels 323

Austenitic CrNiMo(N) steels 323

Austenitic CrNiMoCu(N) steels 323

Nickel-chromium alloys 339

Nickel-chromium-iron alloys (without Mo) 339

Nickel-chromium-molybdenum alloys 339

Nickel-copper alloys 339

Zinc 343

Bibliography 344

Key to materials compositions 351

Index of materials 391

Subject index 401