Acknowledgments | p. xiii |
Editors' Biographies | p. xv |
Foreword | p. xvii |
Preamble | p. xix |
Determination of the Hardness of the Oxide Layers of 2017 A Alloys | p. 1 |
Effect of Non-Metallic Inclusions on Hydrogen Induced Cracking | p. 11 |
Defect Assessment on Pipe Transporting a Mixture of Natural Gas and Hydrogen | p. 19 |
Reliability Analysis of Low Alloy Ferritic Piping Materials | p. 33 |
Experimental Characterization and Effect of the Triaxiality on the Behavior of the HDPE | p. 43 |
Effects of Aggressive Chemical Environments on Mechanical Behavior of Polyethylene Piping Material | p. 49 |
Hydrogen Embrittlement Enhanced by Plastic Deformation of Super Duplex Stainless Steel | p. 59 |
Hydrogen Effect on Local Fracture Emanating from Notches in Pipeline Steels | p. 69 |
Reliability Assessment of Underground Pipelines Under Active Corrosion Defects | p. 83 |
An Overview of the Applications of NDI/NDT in Engineering Design for Structural Integrity and Damage Tolerance in Aircraft Structures | p. 93 |
Improvement in the Design of Automobile Upper Suspension Control Arms Using Aluminum Alloys | p. 101 |
Performances of Vehicles' Active Suspensions | p. 113 |
Damaging Influence of Cutting Tools on the Manufactured Surfaces Quality | p. 121 |
Design and Test of a Sandwich T-Joint for Naval Ships | p. 131 |
Vibroacoustic Sources Identification of Gear Mechanism Transmission | p. 143 |
Prediction of Structural and Dynamic Behaviors of Impacted Plates | p. 153 |
Application of Structural INTegrity Assessment Procedure to Nuclear Power Plant Component | p. 163 |
Failure Assessment Diagrams in Structural Integrity Analysis | p. 173 |
Degradation and Failure of Some Polymers (Polyethylene and Polyamide) for Industrial Applications | p. 183 |
On the Structural Integrity of the Nano-PVD Coatings Applied on Cutting Tools | p. 195 |
Investigation of Energy Balance in Nanocrystalline Titanium Under Cyclic Loading | p. 205 |
Behavior of Stainless Steel 316L Under Impact Test | p. 213 |
Spall Fracture in ARMCO Iron: Structure Evolution and Spall Strength | p. 219 |
Damage Modelling of Impacted Tubular Structures by Using Material Property Degradation Approach | p. 227 |
Fracture Control for Northern Pipelines | p. 237 |
The Influence of the Interface on Fracture Parameters | p. 245 |
Crack Propagation in the Vicinity of the Interface Between Two Elastic Materials | p. 255 |
Fracture Behaviour of TiAl Intermetalics | p. 265 |
Numerical and Experimental Investigations of Mixed Mode Fracture in Granite Using Four-Point-Bend Specimen | p. 275 |
Experimental and Numerical Determination of Stress Intensity Factors of Crack in Plate with a Multiple Holes | p. 285 |
Dynamic Response of Cracked Plate Subjected to Impact Loading Using the Extended Finite Element Method (X-FEM) | p. 297 |
On Heterogeneity of Welded Joint by Modelling of Diffusion | p. 307 |
Correlation of Microstructure and Toughness of the Welded Joint of Pipeline Steel X65 | p. 315 |
Effect of the Residual Fatigue Damage on the Static and Toughness Properties | p. 323 |
Influence of Fatigue Damage in Dynamic Tensile Properties of AISI 4140T Steel | p. 331 |
Low-Cycle Fatigue of Al-Mg Alloys | p. 341 |
Damage of Glulam Beams Under Cyclic Torison: Experiments and Modelling | p. 349 |
Statistical Study of Temperature Effect on Fatigue Life of Thin Welded Plates | p. 357 |
Resideual Stress Effect on Fatigue Crack Growth of SENT Specimen | p. 367 |
Analysis of Elliptical Cracks in Static and in Fatigue by Hybridization of Green's Functions | p. 375 |
Influence of Coating on Friction and Wear of Combustion Engine Piston Rings | p. 387 |
Optimization Constrained of the Lifetime of the CBN 7020 During the Machining of Steel 100 Cr6 | p. 395 |
Comparison of Simulation Methods of Pulsed Ultrasonic Fields Radiated in Isotropic Solids | p. 405 |
Investigation of Ag Doping Effects on Na1.5C02cO4 Elastic Parameters | p. 415 |
The Dynamics of Compressible Herschel-Bulkley Fluids in Die-Swell Flows | p. 425 |
Numerical Simulation of the Behaviour of Cracks in Axisymmetric Structures by the Dual Boundary Element Method | p. 435 |
Numerical Evaluation of Energy Release Rate for Several Crack Orientation and Position to the Bi-Material Interface Plates | p. 445 |
Numerical Simulation of the Ductile Fracture Growth Using the Boundary Element Method | p. 455 |
Enriched Finite Element for Model Analysis of Cracked Plates | p. 463 |
A New Generation of 3D Composite Materials: Advantage and Disadvantage | p. 473 |
Benefit from Embedded Sensors to Study Polymeric Composite Structures | p. 485 |
Effect of Temperature and Initiatory on Glass Fibre/Unsaturated Polyester Composite: Cross-linking, Mechanical Properties | p. 497 |
Theoretical and Experimental Investigations of the Plane Strain Compression of Amorphous Polymers in the form of a Flat Plate | p. 505 |
Wavelet-Based Multifractal Identification of Fracture Stages | p. 513 |
Characterization of Mixed Mode Delamination Growth and Thresholds | p. 523 |
Modification of Cellulose for an Application in the Waste Water Treatment | p. 531 |
A Full 3D Simulation of Plastic Forming Using a Heuristic Generalised Contact Algorithm | p. 539 |
A Novel Approach for Bone Remodeling After Prosthetic Implantation | p. 553 |
Hybrid Composite-Metal Hip Resurfacing Implant for Active Patient | p. 567 |
Anisostropic and Unilateral Damage Application to Concrete | p. 573 |
The Behaviour of Self-Compacting Concrete Subjected to an External Sulphate Attack | p. 583 |
Mixed Finite Element for Cracked Interface | p. 591 |
Three-Dimensional T-Stress to Predict the Directional Stability of Crack Propagation in a Pipeline with External Surface Crack | p. 601 |
Table of Contents provided by Ingram. All Rights Reserved. |
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.