Fracture Mechanics of Ceramics

by Bradt, R. C.; Munz, D.; Sakai, M.; White, K.

• ISBN13: 9780387241340
• ISBN10: 0387241345
• Format: Hardcover
• Copyright: 2005-09-01
• Publisher: Springer Verlag

Summary

The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The symposium also addressed new issues on fundamentals of fracture mechanics and contact mechanics, and a session on reliability and standardization.

Table of Contents

Preface	ix
Contact Mechanics
Atomic Force Microscopy at Ultrasonic Frequencies	1	(12)
Walter Arnold
A. Caron
S. Hirsekom
M. Kopycinska-Muller
U. Rabe
M. Reinstadtler
Indentation Size Effect on the Hardness of Zirconia Polycrystals	13	(8)
T. Akatsu
S. Numata
M. Yoshida
Y. Shinoda
F. Wakai
Indentation Fracture, Acoustic Emission and Modelling of the Mechanical Properties of Thin Ceramic Coatings	21	(22)
S.J. Bull
I. Arce-Garcia
E.G.-Berasetegui
T.F. Page
Nanoindentation, Nanoscratch and Nanoimpact Testing of Silicon-Based Materials with Nanostructured Surfaces	43	(14)
Jinjun Lu
T. Xu
Q. Xue
B.D. Beake
Microstructural Control of Indentation Crack Extension under Externally Applied Stress	57	(12)
Robert F. Cook
Instrumented Hardness Test on Alumina Ceramics and Single Crystal with Spherical Indenter	69	(8)
Shuji Sakaguchi
K. Hirao
Y. Yamauchi
S. Kanzaki
Glass
Controlling the Fragmentation Behavior of Stressed Glass	77	(16)
R. Tandon
S.J. Glass
Elasto-Plastic Behavior of Glassy Carbon and Silica Glass by Nanoindentation With Spherical-Tipped Indenter	93	(8)
N. Iwashita
M. Swain
J.S. Field
Scratch Test for Evaluation of Surface Damage in Glass	101	(12)
S. Yoshida
T. Hayashi
T. Fukuhara
K. Soeda
J. Matsuoka
N. Soga
Shear-Driven Damage and Internal Friction in Indentation Loading of a Glass-Ceramic	113	(8)
Anthony Fischer-Cripps
Indentation and Scratching of Glass: Load, Composition, Environment and Temperature Effects	121	(14)
Jean-Christophe Sangleboeuf
Tanguy Rouxel
Effects of Tin on the Physical Properties and Crack Growth in Soda-Lime-Silica Float Glass	135	(14)
Matthew H. Krohn
John R. Hellmann
Carlo G. Pantano
Nathan P. Lower
Richard K. Brow
Indentation Size Effects for Glasses: Yes, There is a Fracture	149	(24)
George D. Quinn
Fracture of Nano-Scale Materials
Slow Crack Propagation in Ceramics at the Nano- and Micro-scale: Effect of the Microstructure	173	(18)
J. Chevalier
G. Fantozzi
Toughening and Strengthening Mechanisms in Nanocomposites based on Dislocation Activity	191	(12)
Hideo Awaji
S-M Choi
Composites
Creep Behavior and Mechanisms for CMCs with Continuous Ceramic Fibers	203	(18)
Jean-Louis Chermant
Gaelle Farizy
Guillaume Boitier
Severine Darzens
Jean Vicens
Jean-Christophe Sangleboeuf
Strain Accumulation and Damage Evolution during Creep of SiCf/SiC Composites	221	(12)
B. Wilshire
H. Burt
Modeling Multilayer Damage in Cross-ply Ceramics Matrix Composites	233	(12)
M. Kashtalyan
H.W. Chandler
Quantification of Toughness Increase Due to Metal Particles in Glass Matrix Composites	245	(18)
M. Kotoul
A.R. Boccaccini
I. Dlouhy
Fracture Resistance of Hybrid Glass Matrix Composite and its Degradation Due to Thermal Aging and Thermal Shock	263	(12)
I. Dlouhy
Z. Chlup
S. Atiq
A.R. Boccaccini
Creep Investigation on SiCf-SiBC Composites	275	(12)
Gaelle Farizy
Jean-Louis Chermant
Jean Vicens
Jean-Christoph Sangleboeuf
Fracture Toughness of BaTiO3 -- MgO Composites Sintered by Spark Plasma Sintering	287	(10)
S. Rattanachan
Y. Miyashita
Fracture Toughness of BaTiO3 and BaTiO3-AI203 Composite Under Applied Electric Field	297	(10)
S. Rattanachan
Y. Miyashita
Y. Mutoh
Room temperature Post-Fracture Tensile (PFT) Study of Two Fiber-Reinforced Ceramic Matrix Composites with a ``Strong'' Fiber/Matrix Interface	307	(10)
R.A. Longoria
N. Du Souich
K. W. White
An FE Model of Carbon/Carbon Composite Fracture	317	(10)
J. Ohgi
J.H. Jackson
A.S. Kobayashi
K.W. White
Fracture Fundamentals
Tailoring the Composition of Self-Reinforced Silicon Nitride Ceramics to Enhance Mechanical Behavior	327	(10)
P.F. Becher
G.S. Painter
H.T. line
M.K. Ferber
Nonlinear Fracture of a Polycrystalline Graphite: Size-Effect Law and Irwin's Similarity	337	(16)
Motosugu Sakai
R. Nonoyama
Fragmentation of Ceramics in Rapid Expansion Mode	353	(12)
S. Maiti
P. Geubelle
K. Rangaswamy
Experimental Approach to Microfracture Process of Ceramics Under Thermal Shock	365	(10)
S. Wakayama
K. Nishino
K. Kubota
T. Wada
S. Kobayashi
Finite Element Analysis of Crack-Path Selection in a Brick and Mortar Structure	375	(12)
R. Sarrafi-Nour
M. Monaharan
C.A. Johnson
Investigation of Crack Growth Process in Dense Hydroxyapatite using the Double Torsion Method	387	(12)
C. Benaqqa
J. Chevalier
M. Saadaoui
G. Fantozzi
Crack Propagation Behavior of Alumina with Different Grain Sizes Under Static and Cyclic Fatigue	399	(12)
H. El Attaoui
M. Saadaoui
J. Chevalier
G. Fantozzi
Effects of Pore/Grain-Size Interaction and Porosity on the Fracture of Electroceramics	411	(10)
C. Lu
R. Danzer
F. Fischer
Fracture of Coatings
Fracture Behaviour of Plasma Sprayed Thermal Barrier Coatings	421	(16)
J. Malzbender
T. Wakui
E. Wessel
R.W. Steinbrech
Particle Impact Damage and Point Load-Induced Fracture Behavior in Zirconia Plasma Spray Coating Film	437	(14)
Y. Akimune
K. Matsuo
T. Sugiyama
H. Yoshida
S. Sodoeka
S. Shimizu
Mode I, Mode II, and Mixed-Mode Fracture of Plasma-Sprayed Thermal Barrier Coating at Ambient and Elevated Temperatures	451	(20)
Sung R. Choi
D. Zhu
R. Miller
Ferroelectric Materials
Modeling of Fracture in Ferroelastic Ceramics	471	(14)
C.M. Landis
Strength and Reliability of Lead Zirconate Titanate Ceramics	485	(14)
C.S. Watson
Reliability Prediction, Standardization and Design
Standard Reference Material 2100: Fracture Toughness of Ceramics	499	(32)
G.D. Quinn
K. Xu
R. Gettings
J.A. Salem
J.J. Swab
Measuring the Real Fracture toughness of Ceramics -- ASTM C1421	531	(24)
J.A. Salem
G.D. Quinn
M.G. Jenkins
Predicting the Reliability of Brittle Material Structures Subjected to Transient Proof Test and Service Loading	555	(24)
N.N. Nemeth
O.M. Jadaan
T. Palfi
E.H. Baker
Estimation and Stimulation of Slow Crack Growth Parameters from Constant Stress Rate Data	579	(18)
J.A. Salem
A.S. Weaver
On Integrity of Flexible Display	597	(12)
P.C.P. Bouten
Fracture of Conductive Cracks in Poled and Depoled PZT-4 Ceramics	609	(16)
Tong-Yi Zhang
Increasing Resistance to Low Temperature Ageing Degradation of Y-TZP by Surface Modification	625	(10)
A. Feder
P. Morcillo
M.J. Anglada
Index	635