Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V

by Singh, J. P.; Bansal, Narottam P.; Bandyopadhyay, Amit

• ISBN13: 9781574981377
• ISBN10: 1574981374
• Edition: 1st
• Format: Hardcover
• Copyright: 2002-01-03
• Publisher: Wiley-American Ceramic Society

Summary

The most recent advancements in the areas of ceramic/composite processing and characterization are presented in this new volume. Selected topics include sol-gel processing, microwave sintering, reaction forming/bonding, polymer precursors, rapid prototyping, mechanical alloying, diamond and diamond-like structures, and functionally graded materials.

Author Biography

J. P. Singh is the author of Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V, published by Wiley.

Narottam P. Bansal received his Ph. D. in 1973 and is a Senior Research Scientist in the Ceramic Branch, Materials and Structures Division, NASA Glenn Research Center. He is a Fellow of the American Ceramic Society and is recipient of NASA's Medal for Exceptional Scientific Achievements, R&D 100 Award and Hind Rattan Award from the NRI Society of India. Dr. Bansal is author/co-author of four books, six invited book chapters, three review articles, eight NASA Tech Briefs, and 215 research papers including 92 peer-reviewed journal articles, and has been awarded seven U.S. Patents.

Amit Bandyopadhyay is the author of Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V, published by Wiley.

Table of Contents

Preface	ix
CVD/CVI and Plasma Technology
Cubic and Tetragonal Hafnium Oxide Films Prepared by lon-Beam-Assisted Deposition	3	(12)
R. R. Manory
I. Shimizu
T. Mori
S. Miyake
H. Saito
G. Kimmel
T. Tanaka
Plasma-Sprayed Ceramic Coatings on Glass and Glass Ceramic Substrates	15	(18)
R. Gadow
A. Killinger
C. Li
Gas Infiltration and Preceramic Polymer Processing
Manufacturing of Biomorphic SiC Ceramics by Gas Phase Infiltration of Wood	33	(10)
E. Vogli
C. Zollfrank
H. Sieber
P. Greil
J. Mukerji
Manufacturing of Anisotropic Ceramics from Preceramic Polymer Infiltrated Wood	43	(10)
C. Zollfrank
R. Kladny
H. Sieber
P. Greil
G. Motz
Rheological Behavior
Modeling the Dynamic Rheological Behavior of AGAR-Based Aqueous Binders	53	(16)
K. C. Labropoulos
D. E. Niesz
S. C. Danforth
Mechanical Alloying
Effects of Alloying with Nb, Re, and Al on Yield Strength of MoSi2	69	(14)
A. A. Sharif
A. Misra
J. J. Petrovic
T. E. Mitchell
Reaction Forming
In situ Synthesis of Nonxide-Boron Nitride (NOBN) Composites	83	(10)
G. J. Zhang
J. F. Yang
T. Ohji
S. Kanzaki
Fabrication of Lightweight Oxide/Intermetallic Composites at 1000°C by the Displacive Compensation of Porosity (DCP) Method	93	(10)
P.J. Wurm
P. Kumar
K. D. Ralston
M. J. Mills
K. H. Sandhage
Microstructure and Mechanical Properties of SiAION Ceramics with Porous Structure	103	(10)
J. Yang
Y. Beppu
G. J. Zhang
T. Ohji
Functionally Graded Materials & Coatings
Functionally Graded Porosity in Ceramics---Analysis with High Resolution Computed Tomography	113	(12)
J. Goebbels
G. Weidemann
R. Dittrich
M. Mangler
G. Tomandl
Novel Processing for Combined Coatings with Dry Lubrication Ability	125	(12)
R. Gadow
D. Scherer
Ceramic Coatings on Fiber Woven Fabrics for Lightweight Ballistic Protection	137	(16)
K. V. Niessen
R. Gadow
Laminated Object Manufacturing
The Effect of Sheetstock on the Layered Manufacturing of a Telescoping Ceramic Actuator	153	(12)
A. A. Bender
R. J. Rayne
Electronic and Magnetic Materials
Binder Removal by Supercritical Extraction from BaTiO3-Pt Multilayer Ceramic Capacitors	165	(10)
S. J. Lombardo
R. V. Shende
D. S. Krueger
Processing and Characterization of PZT and PLZT Thick Films	175	(12)
O. Huang
A. Bandyopadhyay
S. Bose
Micromachining of PZT-Based MEMS	187	(12)
T. B. Myers
S. Bose
A. Bandyopadhyay
J. D. Fraser
Templated Grain Growth of Lead Metaniobate Ceramics by Solid Freeform Fabrication	199	(12)
K. Nonaka
M. Allahverdi
A. Safari
Investigation of Ni-Cu-Zn Ferrite with High Performance Derived from Nanoferrite Powders	211	(8)
X. Wang
W. Qu
L. Li
Z. Gui
J. Zhou
Index	219