This book discusses the analysis, development, and operation of high temperature processes that involve the production of ferrous and nonferrous metals, alloys, refractories, and ceramic materials. The book also discusses the innovative methods for achieving impurity segregation and removal, by-product recovery, waste minimization, and energy efficiency, as well as the various technical, economic, and environmental issues associated with commercial-scale high temperature processing methods. 8 topics are included in the proceedings: High Efficiency New Metallurgical Technology Reduction and Titanium Production Treatment and Recycling of Metallurgical By-Products Alloys and Materials Preparation Sintering and Synthesis Energy and Environment Basic Research of Metallurgical Processes Pelletizing and Raw Materials Processing

Preface	p. xi
Editors	p. xiii
3rd International Symposium on High Temperature Metallurgical Processing
High Efficiency New Metallurgical Technology
A Laboratory Investigation of the Reduction of the Siderite Iron Ore to Iron Nugget	p. 3
Composite Agglomeration Process of Iron Fines	p. 7
Investigation of Pyrometallurgical Nickel Pig Iron (NPI) Production Process from Lateritic Nickel Ores	p. 17
Novel Process for Utilizing Low-Grade Manganese Oxide Ores by Sulfur-Based Reduction Roasting-Acid Leaching	p. 25
Equipment for Pilot Scale Experiments of NO_x Emissions from the Silicon Process	p. 33
Slide Gate Systems for Copper Tapping	p. 41
Recovery of Huangmei Limonite by Flash Magnetic Roasting Technique	p. 49
Studies on Alternative Blast Furnace Burden Structure with High Proportion Sinter	p. 59
Hydrothermal Sulfidation of Carbonate-Hosted Zinc-Lead Ore with Elemental Sulfur	p. 67
Reduction and Titanium Production
Preparation of Titanium Alloy from Titania-bearing Blast Furnace Slag	p. 77
Basic Research of Direct Pyrolysis Performance of MgCl₂ in Molten State	p. 85
Chlorination of Titania Feedstocks	p. 93
Experimental Study on the Pulverization and Reduction Behavior of Sinter in Oxygen Blast Furnace	p. 105
Formation of Ti(C,N) in Blast Furnace Slag Bearing High TiO₂	p. 113
Research on Carbonthermal Reduction Behavior of IImenite	p. 121
Reduction Kinetics of Low Grade Hematite Ore	p. 129
Viscosity Evolution of Blast Furnace Slag Bearing Titanium	p. 137
Basic Research of Metallurgical Process
Thermal Decomposition and Regeneration of Wüstite	p. 147
Competitive Precipitation and Growth of Spinel Crystals in Vanadium Slag	p. 157
Expert System for Grate-Kiln Pellet Production Based on Mathematical Models of Temperature Field	p. 165
The Influence of Sodium Oxide on the Distribution Behavior of Some Elements at the S-Furnace of the Mitsubishi Process	p. 175
Effect of Temperature on Equilibrium Phase Relation and Liquidus of CaO-SiO₂-Al₂O₃-FeO_x System	p. 183
Viscosity Determination of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace	p. 189
Effect of MgO Content on Melting Features and Viscosity of SiO₂-CaO-MgO-Al₂O₃-FeO Slag in Nickel Laterite Metallurgy	p. 197
Influence of Silicon Content in Hot Metal on Mineralogical Characterization and Physico-chemical Properties of Vanadium Slag	p. 203
Analysis of Influence Factors on the Melting Point of the Freeze Slag Inside Flash Smelting Furnace Brickless Reaction Shaft	p. 211
Alloy and Materials Preparation
Improving Hot Workability of Ledeburitic Tool Steels	p. 221
Influence of Elements Segregation on Creep Properties of a Single Crystal Nickel-Based Superalloy	p. 229
Preparation of Titanium Ferrous Alloys with Low Oxygen Content Prepared by Reduction-SHS	p. 237
Preparing Aluminum-Scandium Alloys Using Direct Hall Reduction Process	p. 243
Production of NbAl₃ Powders through Sodium Reduction of Oxides in Molten Salts	p. 251
Recrystallization of L-605 Cobalt Superalloy during Hot-Working Process	p. 257
Research on Inclusions in CuCr Alloy Prepared by Thermit Reduction	p. 265
Settling of Inclusions in Top-cut Solar Grade Silicon SoG-Si Scraps under Electromagnetic Field	p. 271
Study and Application of the Taphole Clay with High Strength and Environment-friendly in a New Blast Furnace with 3800M3 Volume	p. 279
Sintering and Synthesis
Strengthening the Sintering of Iron Concentrate Fines by High Pressure Roller Grinding Pretreatment	p. 291
Research on Sintering Properties of Vanadium-Titanum Magnetite Concentrate	p. 299
Influence of Limonite Proportion on Sinter Quantity and Quality	p. 307
In Situ Observation of High Temperature Properties of Iron Ore during Sintering Process	p. 315
Air Leakage Online Monitoring and Diagnosis Model for Sintering	p. 323
Investigation on the Interfaces of M42/45 Steel Bimetal Composites Sintered by Spark Plasma Sintering	p. 331
Energy and Environment
Current Status of Heat Recovery from Granulated Slag	p. 339
Contribution to the Energy Optimization in the Pyrometallurgical Treatment of Greek Nickeliferous Laterites	p. 349
Strengthening Refractory Iron Ore Sintering with Biomass Fuel	p. 357
Combustion Behavior of Pulverized Coal Injection in Corex Melter Gasifier	p. 365
Improved Short Coil Correction Factor for Induction Heating of Billets	p. 373
Liberation of Metallic-Bearing Minerals from Host Rock Using Microwave Energy	p. 383
Effects of Binders Additives on Compressive Strength of Hematite Pellets in Firing Process	p. 391
Mechanisms of NO Formation during SiO Combustion	p. 401
Pilot Scale Measurements of No Emissions from the Silicon Process	p. 411
Treatment and Recycling of Solid Slag/Wastes
An Integrated Strategy for Whole Ecological Utilization of Typical Industrial Solid Wastes in China	p. 421
Chlorination Behaviors of Copper Phases by Calcium Chloride in High Temperature Oxidizing-Chloridizing Roasting	p. 429
Effect of Iron Containing Metallurgical Byproducts on Pulverized Coal Combustion Efficiency	p. 439
Effect of SiO₂ Addition on Production of Fe-Si-Mn Alloy from Adjusted Converter Slag	p. 447
Solidification of EAF Stainless Steel Dust	p. 453
Study on Cementing Material Making with Electrolytic Manganese Residue	p. 461
Study on the Desulfuration of Pyrite Cinder Pellets	p. 473
Pelletizing and Raw Materials Processing
Effects of Sodium Salts-Modified Paigeite on Dephosphorization of High-Phosphorus Oolitic Hematite during Reduction	p. 483
Study of Certain Parameters in Laboratory-Scale Smelting of Sivrihisar Laterite Ores of Turkey	p. 491
Effect of Basicity and MgO on the Pelletzing of Specularite Concentrate	p. 499
Effects of MHA Binder on Roasting Behaviors of Oxidized Pellets from Specularite Concentrate	p. 507
A Study of Carbon-Burdened and Cold-Bonded Pelletizing-Electrosmelting Process Disposing Low-Grade Manganese Ore	p. 515
Author Index	p. 523
Subject Index	p. 527
Table of Contents provided by Ingram. All Rights Reserved.

What is included with this book?

The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.

The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.